1994 PONTIAC FIREBIRD brake

Parking
Parking Brake
The parking brake uses the brakes on the
rear wheels.
To set the parking brake: Hold the brake
pedal down and pull up on the parking brake lever. If the ignition is on, the brake
system warning light will come on.
To release the parking brake: Hold the
brake pedal down.
Pull the parking brake
lever up until you can push in the release
button. Hold the release button in as you
move the brake lever all the way down.
NOTICE:
Driving with the parking brake on
can cause your rear brakes to over-
heat. You may have to replace them,
and you could also damage other
parts of your vehicle.
If you are towing a trailer and are
parking on any hill:
See “Towing a
Trailer” in the Index. That section shows
what to do first to keep the trailer from
moving.
63 ...
ProCarManuals.com

Features and Controls
Shifting into P (Park)
(AUTOMATIC TRANSMISSION)
1. Hold the brake pedal down with your
right foot and set the parking brake.
2. Move the shift lever into T“ (Park)
position like this:
Hold in the button on the lever,
and push the lever all the way
toward the front of your vehicle.
3. Move the ignition key to “LOCK.”
4. Remove the key and take it with you.
If you can walk away from your
vehicle with the ignition key in your
hand, your vehicle is in
“P’ (Park).
Leaving Your Vehicle with the
Engine Running
(AUTOMATIC TRANSMISSION)
If you have to leave your vehicle with the
engine running, be sure your vehicle is
in
“P’ (Park) and your parking brake is
firmly set before you leave it. After
you’ve moved the shift lever into the
“P’
(Park) position, hold the regular brake
pedal down. Then, see if you can move
the shift lever away from
“P’ (Park)
without first pushing the button. If you
can, it means that the shift lever wasn’t
fully locked into
“P” (Park).
... 64
ProCarManuals.com

Torque Lock
(AUTOMATIC TRANSMISSION)
If you are parking on a hill and you don’t
shift your transmission into “P” (Park)
properly, the weight of the vehicle may
put too much force on the parking pawl in
the transmission. You may find it difficult
to pull the shift lever out of “P” (Park)
This is called “torque lock.” To prevent
torque lock, set the parking brake and
then shift into “P’7 (Park) properly before
you leave the driver’s Seat. To find out
how, see “Shifting Into “P” (Park)” in
the Index.
When you are ready to drive, move the
shift lever out of
“P” (Park) BEFORE you
release the parking brake.
If “torque lock” does occur, you may
need to have another vehicle push yours
a little uphill to take some of the pressure
from the transmission,
so you can pull the
shift lever out of “P” (Park).
Shifting out of P (Park)
(AUTOMATIC TRANSMISSION)
Your Pontiac has a brake-transmission
shift interlock. You have to fully apply
your regular brake before you can shift
from “P” (Park) when the ignition is in
the “Run” position. See “Automatic
Transmission” in the Index.
If you cannot shift out of
“F”’ (Park), ease
pressure on the shift lever
- push the
shift lever all the way into
“P” (Park) and
release the shift lever button as you
maintain brake application. Then press
the shift lever button and move the shift
lever into the gear you wish.
If you ever hold the brake pedal down but
still can’t shift out of
“P” (Park), try this:
1. Turn the key to “Off.”
2. Apply and hold the brake until the end
3. Shift to “N’ (Neutral).
4. Start the vehicle and then shift to the
drive gear you want.
of
Step
4.
5. Have the vehicle fixed as soon as you
can.
Parking Your Vehicle
(MANUAL TRANSMISSION)
Before you get out of your vehicle, put
your manual transmission in
“R’
(Reverse) and firmly apply the parking
brake.
If your vehicle is equipped
to tow a
trailer, see “Towing a Trailer” in the
Index.
65..
ProCarManuals.com

Features and Controls
NOTICE:
When using concentrated washer
fluid, follow the manufacturer’s
instructions for adding water.
Don’t mix water with
ready-to-use washer fluid. Water
can cause the solution to freeze
and damage your washer fluid
tank and other parts of the washer
system. Also, water doesn’t clean
as well as washer fluid.
Fill your washer fluid tank only
314 full when it’s very cold. This
allows for expansion, which could
damage the tank if
it is completely
full.
Don’t use radiator antifreeze in
your windshield washer. It can
damage your washer system and
paint.
.. . .
hise Control (opnoN)
Vith Cruise Control, you can maintain a
peed of about
25 mph (40 km/h) or more
rrithout keeping your foot on the
ccelerator. This can really help on long
:ips. Cruise Control does not
work at
peeds below about
25 mph (40 km/h).
Vhen you apply your brakes, or push the
lutch pedal, if you have a manual
ransmission, the Cruise Control shuts
off
To Set Cruise Control
1. Move the Cruise Control switch to
“ON.”
... 72
ProCarManuals.com

Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase your
speed. When you take your foot
off the
pedal, your vehicle will slow down to the
Cruise Control speed you set earlier.
Using Cruise Control on Hills
How well your Cruise Control will work
on hills depends upon your speed, load,
and the steepness
of the hills. When going
up steep hills, you may have to step on
the accelerator pedal to maintain your
speed. When going downhill, you may
have to brake or
shift to a lower gear to
keep your speed down.
Of course,
applying the brake takes you out
of
Cruise Control. Many drivers find this to
be too much trouble and don’t use Cruise
Control on steep hills.
ro Get Out of Cruise Control
:here are several ways to turn off the
3ruise Control:
I. Step lightly on the brake pedal or pus1
the clutch pedal, if you have a manual
transmission;
OR
!. Move the Cruise switch to “OFF.”
:o Erase Speed Memory
Yhen you turn off the Cruise Control or
he ignition, your Cruise Control set speec
nemory is erased.
kaction Control System and Cruise
lontrol
f your traction control system engages
vhile your Cruise Control
is set, Cruise
lontrol will disengage. Your speed will
le
set in memory, though. When Cruise
lontrol engages again, use
“WA”
Resume/Accelerate) to go back to your
et speed.
”‘ 1. 2. 4>
fa...
ProCarManuals.com

turning on the headlights by turning the
headlights on, then turning the switch
back to the parking lights position.
The headlight doors should be open when
driving
in icy or snowy conditions to
prevent the doors from freezing when
closed and when washing the vehicle to
help clean the headlights.
You can open the headlight doors
nanually
:
1. Turn on the headlights.
2. Open the hood.
3. Remove the plastic cover from the
#. Turn the retractor motor knob
retractor motor
knob.
counterclockwise until the headlight
door is fully open. The knob will get
harder to turn when the headlight do01
is all the way up.
retractor motor knob.
5. Replace the plastic cover on the
ro manually close the headlight doors,
:urn the lights off and turn the knob
:lockwise.
If the headlight doors aren’t working properly,
see
your Pontiac dealer
for help.
Daytime Running Lights (Canada)
The Canadian Federal Government has
decided that “Daytime Running Lights”
(DRL) are a useful feature,
in that DIU
can make your vehicle more visible to
pedestrians and other drivers during
daylight hours. DRL are required on new
vehicles sold in Canada.
Your DRL work with a light sensor on top
of the instrument panel. Don’t cover it up.
The front
turn signal lights will come on
in daylight when:
0 The ignition is on
The headlight switch is off, &d
The parking brake is released.
At dusk, the exterior lights will come
on
automatically and the front turn signal
lights will go out. At dawn, the exterior
lights will go out and the front turn signal
lights will come on (if the headlight
switch
is off).
Of course, you may still turn on the
headlights any time you need to.
77 ...
ProCarManuals.com

Features and Controls
To idle your vehicle with the DRL off, set
the parking brake while the ignition is
in
the "Off" or "LOCK" position. Then start
the vehicle. The
DRL will stay off until
you release the parking brake.
. . .78
Fog Lights (Option)
Jse your fog lights for better vision in
!'oggy or misty conditions. Your parking
ights must be
on or your fog lights won'
work.
ro turn the fog lights on, push the right
;ide
of the switch. Push $0 to turn the
Fog lights
off. A light on the switch will
:ome on when the fog lights are
on.
't
Fog lights will go off whenever your high
beams come on. When the high beams go
Dff, the fog lights will come on again. Znterior Lights
Courtesy Lights
When any door is opened, several interior
lights go on. These lights are courtesy
lights. They make it easier for you to
enter and leave your vehicle.
Courtesy lights include the dome light and other lights throughout the interior
of
your vehicle.
ProCarManuals.com

Front Map Lights
Your inside rearview mirror includes two
map lights. Each light has its own switch.
Use the switch closest to the light to turn
it on. The lights will also
go on when a
door is opened.
Floor Mats
Your Firebird’s floor mats are
custom-fitted to the foot wells. Be sure
the driver’s floor mat is in place. If it
isn’t, it could interfere with the
accelerator or brake pedals.
I Mirrors
nside Daymight Rearview Mirror
in inside rearview mirror is attached to
’our windshield. The mirror has pivots
sa
hat you can adjust it up and down or side
o side.
lou
can adjust the mirror for day or night
Iriving. Pull the tab for night driving to
educe glare. Push the tab for daytime
Iriving.
vlanual Adjust Mirror
idjust the passenger side outside mirror
’y hand
so that you can just see the side
’f your vehicle when you are sitting in a
:omfortable driving position.
Convex Outside Mirror
Your right side mirror is convex.
A convex mirror’s surface is curved so
you can see more from the driver’s seat.
Manual Remote Control Mirror
Adjust the driver side outside mirror with
the lever on the door. Adjust the mirror
so
that you can just see the side of your
vehicle when you
are sitting in a
comfortable driving position.
fY...
ProCarManuals.com