1994 OLDSMOBILE BRAVADA ad blue

How to Use this Manual
Safety Warnings and Symbols
You will find a number of safety
cautions in this book. We use a box You will
also find a circle with a slasl
through it in this book. This safety
with gray background and the word
symbol means:
CAUTION to tell you about things that
Don’t
could hurt you if you were to ignore Don’t do this
the warnhg. Don’t let this happen
In the gray caution area, we tell these notices:
you what the hazard
is. Then we tell
you what to do to help avoid or reduce
the hazard. Please read these cautions.
If you don’t,
you or others could be These
mean there
is something
hurt. In
the notice area, we tell you about
something that can damage your
vehicle. Many times,
this damage
would not be covered by your
warranty, and it could be costly. But
the notice
will tell you what to do to
help avoid the damage.
When you read other manuals, you
might see CAUTION and NOTICE
warnings
in different colors or in
different words.
You’ll also see warning labels
on your
vehicle. They use yellow for cautions,
blue for notices and the words
CAUTION or NOTICE.
ProCarManuals.com

Features & Controh
62
Headlights
Push the switch marked pe to turn on:
Parking Lights
Side Marker Lights
Taillights
Instrument Panel Lights
II I II I LIGHTS
Push the -:Q- switch to turn on the
headlights, together with:
Parking Lights
Side Marker Lights
Taillights
Instrument Panel Lights
Pull the switch or press
OFF to turn off
the lights.
Lights on Reminder
If you open the door while leaving the
lights
on, you will hear a warning tone.
Headlight High-Low Beam
To change the headlights from low
beam to high
or high to low, pull the
turn signal lever all the way toward
you.
Then release it.
When the high beams are on,
a blue
light
on the instrument panel also will
be on.
ProCarManuals.com

and the Index will help you find them
quickly. If you’re trailering, it’s a good
idea to review these sections before
you
start your trip.
Check periodically to see that all hitch
nuts and bolts are tight.
See the next section,
Trailer Wiring
Harness.
Trailer Wiring Harness (OPTION)
Your Bravada is equipped with a 7-wire
trailer harness with a 30-amp battery
feed wire. It’s stored under the vehicle
along the rear frame crossmember.
Since connectors for trailers vary, no
connector is provided.
You will need to
obtain one for the trailer
you want to
pull. Have it wired to the harness by a
qualified service technician.
When wiring the harness to a
connector, disconnect the battery before
removing the tape from the wire. The
wire applications are:
White-Ground
Dark green-Right turn signal
Yellow-Left turn signal
Brown-Rear lamps
Light green-Back-up lamps
Red-Battery charging
Blue-Trailer brakes, auxiliary
In use, tape or tie the harness to your
vehicle’s frame rail. Leave enough slack
so the wiring doesn’t bend or break, but
not
so much that it drags on the
ground.
When it’s not in use, fold the harness
neatly and wrap or tie it. Store in the
original place along the frame
crossmember.
137
ProCarManuals.com