ELECTRICAL COMPONENTS
211
NO.FUSEAMPERECIRCUIT
11MIR HTR10Outside rear view mirror defogger
12FOG15Fog lights
13DRL7.5Vehicles sold in Canada
Daytime running light system
14TRAC10Traction control system
15DOME10
Interior light, vanity lights, electric
moon roof system, cruise control
system, open door warning light,
personal lights, trunk room light,
door courtesy lights, footlights,
ignition switch light, clock,
anti-lock brake system, power
antenna, radio, locking with
wireless remote control system,
theft deterrent system
16ECU-B7.5
Locking with wireless remote
control system, anti-lock brake
system, traction control system,
cruise control system, daytime
running light system, air
conditioning system
17ALT
SENSING7.5Charging system
NO.FUSEAMPERECIRCUIT
18AM215
Multiport fuel injection system /
sequential multiport fuel injection
system, SRS, charging lamp,
starting system, electronic
ignition system / distributor
ignition system, gauges and
meters, service reminder
indicators and warning buzzers
(except discharge and open door
warning lights)
19TEL15Telephone
20HAZ. HORN20Emergency flashers, horns
21EFI20
Electronically controlled
automatic transmission system,
multiport fuel injection system /
sequential multiport fuel injection
system
22RAD NO. 125
Radio, cassette tape player,
compact disc player, power
antenna
23IG230Electronic ignition system /
distributor ignition system
ELECTRICAL COMPONENTS
Driver’s side kick panel
Engine compartment
Pull-out tool
Spare fuses
215
CHECKING AND REPLACING
THE BLADE TYPE FUSES
1. Turn the ignition switch off and open the fuse box lid.Determine which fuse may be causing the problem. The lid of
the fuse box shows the name of the circuit for each fuse.
2. Make sure the inoperative component is turned off. Pull
the suspected fuse straight out with the pull-out tool and
check it. If it has blown, push a new fuse into the clips.
a. Look carefully at the fuse. If the thin wire is broken, the fuse
has blown. If you are not sure or if it is too dark to see, try
replacing the suspected fuse with one of the same value that
you know is good.
b. Install only a fuse with the amperage rating designated on
the fuse box lid.