ELECTRICAL COMPONENTS
210
NO.FUSEAMPERECIRCUIT
1SEAT-HTR15Seat heater
2STOP20
Shift lock system, high mounted
stoplight, cruise control system,
anti-lock brake system, traction
control system, multiport fuel
injection system / sequential
multiport fuel injection system,
stop lights
3GAUGE15
Rear window and outside rear
view mirror defogger, heater
control system, air conditioning
system, gauges and meters,
service reminder indicators and
warning buzzers (except
discharge and open door
warning lights), charging system,
automatic transmission indicator,
back-up lights, daytime running
light system
4ECU-IG10
Shift lock system, telephone,
power door lock system for
passenger seat, seat belt system,
anti-lock brake system, power
steering control system, traction
control system, cruise control
system, driving pattern selector
switch, tilt and telescopic control
system, power antenna, electronic
cooling fan system, instrument
panel lights, automatic light
control system, power door lock
control system
NO.FUSEAMPERECIRCUIT
5CIG15
Clock, air conditioning system,
radio, cassette tape player,
compact disc player, shift lock
system, SRS, front and rear
cigarette lighters, power door
lock control system, power rear
view mirror control system
6TURN10Turn signal lights and indicator
7WIPER20Windshield wipers and
washer, headlight cleaner
8PANEL7.5
Automatic transmission
indicator, heater control
system, emergency flasher
switch, glovebox light, rear
ashtrays, clock, front cigarette
lighter light, radio, cassette
tape player, compact disc
player, driving pattern selector
switch light, instrument panel
lights, daytime running light
system
9SRS7.5SRS
10TAIL10License plate lights, parking
lights, tail lights
ELECTRICAL COMPONENTS
Driver’s side kick panel
Engine compartment
Pull-out tool
Spare fuses
215
CHECKING AND REPLACING
THE BLADE TYPE FUSES
1. Turn the ignition switch off and open the fuse box lid.Determine which fuse may be causing the problem. The lid of
the fuse box shows the name of the circuit for each fuse.
2. Make sure the inoperative component is turned off. Pull
the suspected fuse straight out with the pull-out tool and
check it. If it has blown, push a new fuse into the clips.
a. Look carefully at the fuse. If the thin wire is broken, the fuse
has blown. If you are not sure or if it is too dark to see, try
replacing the suspected fuse with one of the same value that
you know is good.
b. Install only a fuse with the amperage rating designated on
the fuse box lid.
