1994 FIAT PUNTO handbrake

[x] Cancel search: handbrake

Page 58 of 225

FIAT PUNTO 1994 176 / 1.G Workshop Manual 
2A*10 SOHC (8-valve) petrol engine in-car repair procedures 
10.10 Tighten the flywheel bolt to the specified torque However, it may be possible lo have it surface*ground; seek (he advice of a Rat de

Page 75 of 225

FIAT PUNTO 1994 176 / 1.G Workshop Manual 
Diesel engine in-car repair procedures
 2C*11 

10 firmly apply the handbrake, then jack up 
Ihe
 front of the car and support it securely on 
arte stands
 (see Jacking and vehicle support). Remove t

Page 84 of 225

FIAT PUNTO 1994 176 / 1.G Workshop Manual 
2C*2 Diesel engine in-car repair procedures 
10.2 Locking the flywheel using a homo* made tool 
10 Flywheel - £ removal, inspection § and refitting ^ 
Removal 1 Remove the transmission and clutch a

Page 85 of 225

FIAT PUNTO 1994 176 / 1.G Workshop Manual 
11.15 Left-hand engine mounting viewed from below 9 lower the engine sufficiently to remove the mounting from the engine bracket. 10 Locate the new mounting in the engine bracket, refit the nut and w

Page 92 of 225

FIAT PUNTO 1994 176 / 1.G Workshop Manual 
2D*10 Engine removal and overhaul procedures 
Engine and transmission -removal, separation, connection and refitting 
Note: The engine Is lowered from the engine compartment as a complete unit with t

Page 124 of 225

FIAT PUNTO 1994 176 / 1.G Workshop Manual 
4A*2 Fuel system - single-point petrol Injection models 
motor c) Ensure that all hoses are correctly reconnected and, where necessary, that their retaining clips are securely tightened. d) Adjust th

Page 143 of 225

FIAT PUNTO 1994 176 / 1.G Workshop Manual 
Fuel system - diesel models 4C*3 
14.6 Nuts securing the exhaust downpipe to the exhaust manifold 14.8 Disconnecting the oil return pipe from tho turbocharger 
13 Turbocharger -description and precau

Page 145 of 225

FIAT PUNTO 1994 176 / 1.G Workshop Manual 
4D*2 Exhaust and emission control systems 
2.2 Charcoal canister location behind tho right-hand headlight 
conditions, via a plunger valve, The system is controlled electronically by means of an emis
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 49-56 ... 56 next >