1994 CHEVROLET TRACKER engine

How to Use This Manual
How to Use This
Manual
Many people read their owner’s manual
from beginning to end when they first
receive their new vehicle. This will help
you learn about the features and controls
for your vehicle. In this manual, you’ll
find that pictures and words work
together to explain things quickly.
Index: A good place to look for what
you need is
the Index in back of the
manual. It’s an alphabetical list of all that’s
in the manual, and the page
number where you’ll find
it.
Parts 1-8: Each part of this manual
begins with a brief list
of its contents, so
you can often find at a glance if a part
contains the information you want.
How to Use This Manual: This part
tells you how to use your manual and
includes safety and vehicle damage
warnings and symbols.
Part 1 - Seats & Restraint Systems:
This part tells you how to use your seats
and safety belts properly.
Part 2 - Features & Controls: This part
explains how to start and operate your
Geo.
Part 3 - Comfort Controls & Audio
Systems:
This part tells you how to adjust
the comfort controls and how to operate
your sound system.
Part 4 - Your Driving and the Road:
Here you’ll find helpful information and
tips about the road and how to drive under
different conditions.
Part 5 - Problems on the Road: This
part tells you what to
do if you have a
problem while driving, such as a flat tire
or engine overheating, etc.
Part 6 - Service & Appearance Care:
Here the manual tells you how to keep
your Geo running properly and looking
good.
Part 7 - Maintenance Schedule: This
part tells when
to perform vehicle
maintenance and what fluids and
lubricants to use.
... 4
ProCarManuals.com

These symbols are on some of your
controls:
Windshield Wiper
Windshield Washer
Windshield Defroster
Rear Window Wiper
and Washer
Rear Window Wiper
Rear Window Defogger Ventilating Fan Recirculate
Inside
Air
Circulate
Outside Air
Bi-Level
Vent
Heater
These symbols are used on warning and
indicator
lights:
Engine Coolant Temperature
Battery Charging System
Fl
Fuel
Engine Oil Pressure
Brake (Canada) Daytime Running Lights
.***to
(Canada) **e
f ...
ProCarManuals.com

Here you can learn about the
many standard and optional
features on your Geo. and
information on starting. shifting
and braking
. Also explained are
the instrument panel and the
warning systems that tell you
if
everything is working properly -
and what to do if you have a
problem
.
Part 2
Features & Controls
Keys ........................................................... 36
DoorLocks ...................................................... 37
Theft
........................................................... 39
New Vehicle “Break-In” ........................................... 39
Ignitionswitch ................................................... 39
Starting
Your Engine .............................................. 40
Automatic Transmission ................. ...................... 42
Manual Transmission
............... ...................... 44
Four-wheel Drive ................................................ 46
Parking ......................................................... 48
EngineExhaust
.................................................. 51
Windows ....................................................... 52
Horn
........................................................... 53
Adjustable Steering Column ........................................ 53
Interior Lights
................................................... 57
Windshield WiperjWasher Lever
..................................... 57
Rear Window Wiperwasher
........................................ 59
Mirrors ......................................................... 59
Storage and Compartments
....................................... 60
Sun Visors
................................... .. ..... 61
Passenger Assist Grips
............................................. 62
Ashtray and Lighter
............................................... 62
Instrument Panel and Cluster
........................................ 66
The Turn Signalbights Control/Headlight Beam Lever ................... 54
ConvertibleTop
.................................................. 72
35 I ..
ProCarManuals.com

Features and Controls
ON (C): Position to which the switch
returns after
you start your engine and
release the switch. The switch stays in the
“ON’ position when the engine is
running. But even when the engine is not
running, you can use
“ON’ to operate
your electrical power accessories and to
display some instrument panel warning
and indicator lights.
START (D): Starts the engine. When the
engine starts, release the key. The ignition
switch will return to
“ON’ for normal
driving.
When the engine is not running, “ACC”
and
“ON’ allow you to operate your
electrical accessories, such as the radio
and ventilation fan.
A warning chime will sound if you open
the driver’s door when the ignition is in
“ACC” or “LOCK” and the key is in the
ignition.
NOTICE:
If your key seems stuck in “LOCK”
and you can’t
turn it, be sure it is all
the way in. If it is, then turn the steer-
ing wheel left and right while you
turn the key hard. But turn the key
only with your hand. Using a tool to
force it could break the key or the
ignition switch. If none of this works,
then your vehicle needs service.
Starting Your Engine
Automatic transmission: Move your
shift lever to
“P” (Park) or “N’ (Neutral).
Your engine won’t start in any other
position
- that’s a safety feature. To
restart when you’re already moving, use
“N’ (Neutral) only.
NOTICE:
Don’t try to shift to “P’ (Park) if your
Geo is moving.
If you do, you could
damage the transmission. Shift to
“P”
(Park) only when your vehicle is
stopped.
Manual transmission: The gear selector
should be in neutral. Hold the clutch
pedal to the floor and start the engine.
Your vehicle won’t start if the clutch
pedal is
not all the way down - that’s
a safety feature.
To start your engine:
1. Without pushing the accelerator pedal,
turn your ignition key
to “START.”
When the engine starts, let
go of the
key.
... 40
ProCarManuals.com

NOTICE:
Holding your key in “START” for
longer than 15 seconds at a time will
cause your battery to be drained
much sooner. And the excessive heat
can damage your starter motor.
2. If it doesn’t start right away, hold
your key
in “ START” for about three
seconds at a time until your engine
starts. Wait about 15 seconds between
each
try to help avoid draining your
battery.
If your engine still won’t start, call your
dealer for help.
NOTICE:
Your engine is designed to work with
the electronics in your vehicle. If you
add electrical parts or accessories,
you could change the way
the fuel
injection system operates. Before
adding electrical equipment, check
with your dealer. If you don’t, your
engine might not perform properly.
If you ever have to have your vehicle
towed, see the part of this manual
that tells how to do
it without damag-
ing your vehicle. See “Towing Your
Vehicle” in the Index.
)riving through Deep Standing
Water Engine Coolant Heater (Engine
Block Heatel‘) (CANADA)
In very
cold weather, 0 OF (- 1 8 O C) or
colder, the engine coolant heater can help.
You’ll get easier starting and better fuel
economy during engine warm-up.
Usually, the coolant heater should be
plugged in a minimum
of four hours
prior to starting your vehicle.
To use the coolant heater:
1. Turn off the engine.
2. Open the hood and unwrap the
electrical cord.
3. Plug it into a normal, grounded
110-volt outlet.
NOTICE:
If you drive too quickly through deep
puddles
or standing water, water can
come in through your engine’s air
intake and badly damage your
engine.
If you can’t avoid deep
puddles or standing water, drive
through them very slowly.
41 ..
ProCarManuals.com

Features and Controls
NOTICE:
After you’ve used the coolant heater,
be sure to store the cord as
it was
before to keep
it away from moving
engine parts. If you don’t, it could be
damaged.
How long should you keep the coolant
heater plugged
in? The answer depends
on the weather, the kind
of oil you have,
and some other things. Instead of trying
to list everything here, we ask that you
contact a Geo dealer in the area where
you’ll be parking your vehicle. The dealer
can give
you the best advice for that
particular area.
Automatic
Transmission
There are several different positions for
your
shift lever.
0 P (Park)
This locks your rear wheels. It’s the best
position to use when you start your
engine because your vehicle can’t move
easily.
1
-..42
ProCarManuals.com

Ensure the shift lever is fully in “F‘”
(Park) range before starting the engine.
Your Geo has a brake-transmission shift
interlock.
You have to fully apply your
regular brakes before you can shift from
“P” (Park) when the ignition key is in the
“ON’ position. If you cannot shift out of
“P’ (Park), ease pressure on the shift
lever
- push the shift lever all the way
into
“P’ (Park) and release the shift lever
button as you maintain brake application.
Then press the shift lever button and
move the shift lever into the gear you
wish. See “Shifting out of ‘P’ (Park)”
in
the Index.
0 R (Reverse)
Use this gear to back up.
I NOTICE:
Shifting to “R” (Reverse) while your
vehicle is moving forward could
damage your transmission. Shift to
“R” only after your vehicle is
stopped.
~~
To rock your vehicle back and forth to gel
out of snow, ice or sand without
damaging your transmission, see “Stuck:
In Sand,
Mud, Ice or Snow” in the Index.
t
0 N (Neutral)
In this position, your engine doesn’t
connect with the wheels. To restart when
you’re already moving, use
“N’ (Neutral)
only. Also, use “N” when your vehicle is
being towed.
NOTICE:
Damage to your transmission caused
by shifting out of “P” (Park) or
“N’
(Neutral) with the engine racing isn’t
covered by your warranty.
0 D (Drive)
This position is for normal driving. If you
need more power for passing, and you’re:
- Going less than about 15 mph
(25
km/h), push your accelerator peda
about halfway down.
- Going about 15 mph (25 km/h) or
more, push your accelerator pedal all
the way down.
You’ll shift down to the next gear and
have more power.
0 2 (Second Gear)
This position gives you more power but
lower fuel economy. You can use “2” on
hills.
It can help control your speed as
you go down steep mountain roads, but
then you would also want to use your
brakes off and on.
Don’t shift into “2” unless you are
going slower than
65 mph
( 105 km/h) with the transfer case in
“4H’ or 35 mph (55 km/h) with the
transfer case in “4L,” or you can
damage your transmission.
43.
ProCarManuals.com

Features and Controls
L (Low Gear)
This position gives you even more power
(but lower fuel economy) than
“2.” You
can use it on very steep hills, or
in deep
snow
or mud. If the selector lever is put il
“L,” the transmission won’t shift into low
gear until the vehicle is going slowly
enough.
n
NOTICE:
Don’t shift into “L,” (Low) at speeds
above 40 mph
(65 km/h) with the
transfer case
in “4L,” or you can
damage your transmission.
NOTICE:
If your rear wheels can’t rotate, don’t
try to drive. This might happen if you
were stuck in very deep sand or mud
or were up against
a solid object. You
could damage your transmission.
Also, if you stop when going uphill,
don’t hold your vehicle there
with
only the accelerator pedal. This could
overheat and damage the
transmission. Use your brakes to hold
your vehicle
in position on a hill.
F
Manual Transmission
ive-Speed
is is your shift pattern. Here’s how to
erate your transmission:
1 (First Gear) - Press the clutch
pedal and shift into
“1.” Then, slowly
let up on
the clutch pedal as you press
the accelerator pedal.
You can shift into
“I” when you’re
going less than
20 mph (32 km/h). If
you’ve come to a complete stop and
it’s hard to shift into
“1,” put the shift
lever
in “Neutral” and let up on the
clutch. Press the clutch pedal back
down. Then shift into
“ 1 .”
0
0
0
0
0
2 (Second Gear) - Press the clutch
pedal as
you let up on the accelerator
pedal and shift into
“2.” Then, slowly
let up on the clutch pedal as you press
the accelerator pedal.
3,4 and 5 (Third, Fourth and Fifth
Gears)
- Shift into “3,” “4” and “5”
the same way you do for “2.” Slowly
let up on the clutch p6dal as you press
the accelerator pedal.
To Stop - Let up on the accelerator
pedal and press the brGke pedal. Just
before
the vehicle stops, press the
clutch pedal and the brake pedal, and
shift to “Neutral.”
Neutral - Use this position when
you start or idle your engine.
R (Reverse) - To back up, press
down the clutch pedal and shift into
“R.” Let up on the clutch pedal slowly
while pressing the accelerator pedal.
You cannot go from
“5” (Fifth Gear) into
“R” (Reverse). If you try, you will be
locked out. You must first shift into
“Neutral,” move the lever to
the left, back
to the right, and then shift into
“R”
(Reverse). This is a safety feature.
... 44
ProCarManuals.com