1994 CHEVROLET CAMARO light

Downloaded from www.Manualslib.com manuals search engine NOTICE:
Towing a vehicle over rough
surfaces could damage
a vehicle.
Damage can occur from
vehicle-
to-ground or vehicle-to-wheel-lift-
equipment contact.
To help avoid
damage, install a towing dolly
and raise vehicle
until adequate
clearance
is obtained between the
ground and/or wheel-lift equipment.
Engine Overheating
You will find a coolant temperature gage
Dn your Chevrolet’s instrument panel.
You may also find a low coolant warning
light on your Chevrolet instrument panel.
If Steam Is Coming from Your Engine:
157.. .

Downloaded from www.Manualslib.com manuals search engine If You’re Stuck: In
Sand, Mud, Ice or
Snow
What you don’t want to do when your
vehicle
is stuck is to spin your wheels.
The method known as “rocking” can help
you get out
when you’re stuck, but you
must use caution.
NOTICE:
Spinning your wheels can destroy
parts of your vehicle as well as the
tires.
If you spin the wheels too fast
while shifting your transmission
back and forth, you can destroy
your transmission.
Rocking your vehicle to get it out:
First, turn your steering wheel left and
right. That
will clear the area around
your front wheels.
If your vehicle has
ASR, you should turn the system off,
(See “ASR System”
in the Index.)
Then
shift back and forth between “R”
(Reverse) and a forward gear (or with a
manual transmission, between First or
Second gear and Reverse), spinning the
wheels as little as possible. Release the
accelerator pedal while you shift, and
press lightly on the accelerator pedal
when
the transmission is in gear. If that
doesn’t get you out after a
few tries, you
may need to be towed out.
If you do
need
to be towed out, see “Towing Your
Vehicle’’
in the Index.
177..

Downloaded from www.Manualslib.com manuals search engine LOW OIL
Engine Oil
If the “LOW OIL” light on the instrument
panel comes on,
it means you need to
check your engine oil level right away.
For more information, see “Low Oil
Light” in the Index. You should check
your engine oil level regularly; this
is an
added reminder.
3.4L L32 (Code S)
It’s a good idea to check your engine oil
every time you get fuel. In order to get an
accurate reading, the oil must be warm
and the vehicle must be
on level ground.
5.7L LTl (Code P)
rurn off the engine and give the oil a few
ninutes to drain
back into the oil pan. If
rrou don’t, the
oil dipstick might not show
he actual level.
187 ...

Downloaded from www.Manualslib.com manuals search engine Service and Appearance Care
”,
d
4
To Check Engine Oil
(3.4L L32 (Code S) Engine)
Pull out the dipstick and clean it with a
paper towel or cloth, then push it back in
all the way. Remove it again, keeping the
tip lower, and check the level.
IC
To Check Engine Oil
(5.7L LTl (Code P) Engine)
Pull out the dipstick slightly. Pinch the
end
of the dipstick tube as you remove
the dipstick to wipe the oil from it. Then
push it all the way back in. Now remove
it without pinching the tube, keeping the
tip lower.
3.4L L32 (Code S)
When to Add Oil:
f the oil is at or below the “ADD” line,
hen you’ll need to add some oil. But you
nust use the right kind. This section
:xplains what kind
of oil to use. For
:rankcase capacity, see “Capacities and
ipecifications” in the Index.
. . .I88

Downloaded from www.Manualslib.com manuals search engine Service and Appearance Care
Engine Coolant
The following explains your cooling
system and how to add coolant when
it
is low. If you have a problem with
engine overheating or if you need
to add
coolant to your radiator, see “Engine
Overheating” in the Index.
The proper coolant for your Chevrolet
will:
0 Give freezing protection down to
Give boiling protection up to 262°F
Protect against rust and corrosion.
0 Help keep the proper engine
Let the warning lights work as they
-34°F (-37°C).
(128°C).
temperature.
should.
What to Use:
Use a mixture of one-half clean water
(preferably distilled) and one-half
antifreeze that meets “GM Specification
1825M,” which won’t damage aluminum
parts.
You can also use a recycled coolant
conforming to GM Specification
1825M
with a complete coolant flush and refill. If
you use
this mixture, you don’t need to
add anything else.
NOTICE:
If you use an improper coolant mix,
your engine could overheat and be
badly damaged. The repair cost
wouldn’t be covered by your war-
ranty.
Too much water in the mix can
freeze and crack the engine, radiator,
heater core and other parts.
. . .I98

Downloaded from www.Manualslib.com manuals search engine Adding Coolant
To Check Coolant:
When your engine is
cold, check the dipstick on the cap of the
coolant recovery tank. The coolant level
should be at
“COLD,” or a little higher.
When your engine
is warm, the level on
the dipstick should be up to
“HOT,” or a
little higher.
If you have the 5.7L LTI (Code P) engine
and this light comes on,
it means you’re
low on engine coolant.
To Add Coolant to the Recovery Tank:
If you need more coolant, add the proper
mix at the coolant recovery tank, but only
when your engine
is cool. If the tank is
very low or empty, also add coolant to the
radiator, see “Engine Overheating” in the
Index for information.
199 ...

Downloaded from www.Manualslib.com manuals search engine To Check Brake Fluid:
You can check the brake fluid without
taking off the cap. Just look at the brake
fluid reservoir. The fluid level should be
above the plastic seam
in the reservoir.
If it isn’t, have your brake system
checked to see
if there is a leak.
After work is done on the brake hydraulic
system, make sure the level
is above the
plastic seam, near the base of the filler
neck.
What to Add:
When you do need brake fluid, use only
DOT-3 brake fluid
- such as Delco-
Supreme 1 l@ (GM Part No. 1052535).
Use new brake fluid from a sealed container
only, and always clean the brakt
fluid reservoir cap before removing it.
NOTICE:
0 Don’t let someone put in the
wrong kind
of fluid. For example,
just a few drops
of mineral-based
oil, such as engine oil, in your
brake system can damage brake
system parts
so badly that they’ll
have to be replaced.
0 Brake fluid can damage paint, so
be careful not to spill brake fluid
on your vehicle.
If you do, wash it
off immediately. See ”Appearance
Care”
in the Index.
Brake Wear
Unless you have the four-wheel disc
brake option, your Chevrolet has front
disc brakes and rear drum brakes.
Disc brake pads have built-in wear
indicators that make
a high-pitched
warning sound when the brake pads are
worn and new pads are needed. The
sound may come and go or be heard all
the time your vehicle is moving (except when
you are
pushing on the brake pedal
firmly).
A CAUTION:
The brake wear warning sound
means that sooner or later your
brakes won’t work well. That could
lead to an accident. When you hear
the brake wear warning sound, have
your vehicle serviced.
NOTICE:
Continuing to drive with worn-out
brake pads could result in costly
brake repair.
Some driving conditions or climates may
cause
a brake squeal when the brakes are
first applied or lightly applied. This does
not mean something is wrong
with your
brakes.
203. I

Downloaded from www.Manualslib.com manuals search engine Contacr your dealer to learn how to
prepare your vehicle for longer storage
periods.
Bulb Replacement
For the proper type of replacement bulb,
see “Replacement Bulbs”
in the Index.
Halogen Bulbs Headlights
Headlight Aiming
Your
vehicle has a mini-quad headlight
system. These headlights have vertical
and horizontal indicators. When the
headlights are properly installed and
adjusted, and the vehicle is on level
ground, both indicators will read in the
:enter of the gage.
If they do not, you can
adjust the aim.
To adjust the aim of your headlights:
1. Move your vehicle to a level surface.
Use a spirit level to be sure. Be sure to
remove any items that are not part of
your original equipment from the
trunk and passenger areas.
No one
should be seated
in the vehicle and
your fuel tank should be about half
full. Check to be sure your tires are at
the correct pressure.
205. .