Downloaded from www.Manualslib.com manuals search engine As you signal a turn or a lane change, if the arrows don’t flash but just
stay on, a signal bulb may be burned out and other drivers won’t see your
turn signal.
If a bulb is burned out, replace it to help avoid an accident. If the green
arrows don’t go on at all when you signal
a turn, check the fuse (see
“Fuses” in the Index) and for burned-out bulbs.
Operation of Lights
Although your vehicle’s lighting system (headlights, parking lights, fog
lamps, side marker lights and taillights) meets all applicable federal
lighting requirements, certain states and provinces may apply their own
lighting regulations that may require special attention before you operate
these lights.
For example, some jurisdictions may require that you operate your lower
beam lights with fog lamps at all times, or that headlights be turned on
whenever you must use your windshield wipers. In addition, most
jurisdictions prohibit driving solely with parking lights, especially at dawn
or dusk. It is recommended that you check with your own state or
provincial highway authority for applicable lighting regulations.
Yeadlight High-Low Beam
To change the
headlights from low
beam to high or high to
low, pull the turn signal
lever all the way toward
you. Then release
it.
When the high beams
are on, this blue light
on the instrument
panel also
will be on.
105
Downloaded from www.Manualslib.com manuals search engine Headlights
The headlight wiring is protected by a circuit breaker in the light switch.
An electrical overload will cause the lights to go on and off, or in some
cases to remain off.
If this happens, have your headlight wiring checked
right away.
Windshield Wipers
The windshield wiDer motor
is protected by a circuit breaker
and a fuse.
If the motor overhkats due to heavy snow, etc., the wiper will stop until
the motor cools. If the overload is caused by some electrical problem and
not snow, etc., be sure to get it fixed.
Power Windows and Other Power Options r
1 Circuit breakers in the fuse panel protect the power windows and other power
accessories. When the current load
is too heavy, the circuit breaker opens and
closes, protecting the circuit until the problem is fixed or goes away. 7
BULB CAMRT
DESCRIPTION BULB NO.
Backup Lights ......................................... 2057
Ash Tray
Illumination
.................................. 1445
Cornering Light
................................... 1156 DC7
Courtesy Reading Light
................................. 168
FogLight
.............................................. 886
Glove Compartment Light
............................... 194
Headlights Composite -Inner High Beam
....... ........................ 9005 HB3
-Outer Low Beam
................................ 9006 HB4
-Export Bulb ........................................... H4
Illumination Entry Lock Lamp ............................ 192
Instrument Panel Illumination
............................ 194
Instrument Panel Telltales
................................ 194
License Plate Light
..................................... 194
Park and Turn Signal
................................ 2357 NA
316
