Downloaded from www.Manualslib.com manuals search engine - COMP (Compression)
Press this button to make soft and loud passages more nearly equal in
volume. for example, classical and jazz music has
very quiet and very loud
- passages in the same tune. The COMP display will light as long as COMP
is on.
~ TAPE and CD Operation
With both a tape and a CD inserted, both the TP and CD indicators in
the display will be lit and either the TP or CD (LED) will also be lit,
- depending on which has the current priority.
TP-CD
Press the lower knob to switch between rape and CD.
~ Setting The Clock (Optional Active Audio Music Systems)
Turn the ignition on. Then:
To Set the Hour:
Press SET, and within 5 seconds,
0 Press and hold SEEK. When the clock gets to the correct hour, let go.
~ To Set the Minutes:
0 Press SET, and within 5 seconds,
~ 0 Press and hold SCAN. When the clock gets to the correct minute, let
go.
Your clock is set.
173
Downloaded from www.Manualslib.com manuals search engine 4.9 LITER ENGINE
Displacement ............................... 4.9L (300 cu. in.)
No. of Cylinders .............................. 8 - 90 Degree V
Power (Acc. to
SAE 51349) ............... 200 (bhp) @ 4100 rpm
Torque
(Acc. to SAE 51349) ............ 275 (lbs. ft.) @ 3000 rpm
Bore
....................................... 92mm (3.623 in.)
Stroke
..................................... 92mm (3.623 in.)
Compression Ratio
.................................... 9.5:l
Cylinder Block
...... Die Cast Alumbum with Iron Cylinder Bores
Cylinder Heads Cast Iron
Intake Manifold
.............................. Cast Aluminum
Lifter Trpe
................................. Roller Hydraulic
Intake Valve Head Diameter
.................. 45mm (1.772 in.)
Exhaust Valve Head Diameter
................. 38mm (1.496 in.)
Pistons
...................................... Cast Aluminum
Firing Order
.................................. 1-8-4-3-6-5-7-2
Left Bank
.......................................... 1-3-5-7
Right Bank
......................................... 2-4-6-8
Camshaft
............................................. Steel
Camshaft Drive
...................................... Chain
Crankshaft Material
..................... Pearlitic Nodular Iron
Main Bearings
......................................... Five
...................................... 250 (kW) @ 4100 rpm
...................................... 375(N.m) @ 3000 rpm
.. - .- :.,-< ...................................
ENGINE LUBRICATION SYSTEM
Type of Intake ..................................... Stationary
Filter System
...................................... Full-Flow
Oil Pump
........................................... Geroto
326
