Page 76 of 323

Features & Controls
74
I
Power Windows (omon)
With power windows, switches on the driver's door armrest control the front
windows when the ignition is on. The
left switch controls the driver's window. The right switch controls the passenger's
window.
The driver's power window switch has
two down positions. Hold the rear of the
switch
in the first position to lower the
window normally.
To activate the auto down feature, fully
press the rear of the switch, then
release. The window will lower
completely.
To stop the window from
lowering
all the way, press the front of
the switch.
To raise the window, press and hold the
front of the switch.
u2210
a Turn Signall
Headlight Beam Lever
The lever on the left side of the steering
column includes your:
Turn Signal and Lane Change
Indicator
0 Headlight High-Low Beam Changer
Cruise Control (Option)
The High-Low Beam feature is
discussed under
Headlights. See the
Idex under Headlights.
r CRUISE
I
Turn Signal and Lane Change
Indicator
The turn signal has two upward (for
Right) and two downward
(for Left)
positions. These
positions allow you to
signal a
turn or a lane change.
To signal a
turn, move the lever all the
way up or down. When the
turn is
finished, the lever will
return
automatically.
ProCarManuals.com
Page 77 of 323

I
I&
A green arrow on. the instrument panel
will flash in the direction of the turn or
lane change.
To signal a lane change, just raise or
lower
the lever until the green arrow
starts to flash. Hold it there until you
complete your lane change. The lever
will return by itself when
you release it.
As you signal a turn or a lane change, if
the arrows don’t flash but just stay on, a
signal bulb may be burned out and other
dhvers won’t see your turn signal. If
a bulb is burned out, replace
it to help
avoid an accident. If the green arrows
don’t go on at all when you signal a
turn, check the fuse (see the
Index under
Fuses & Circuit Breakers) and for
burned-out bulbs.
If you have a trailer- towing option with
added wiring for the trailer lights, a
different
turn signal flasher is used.
With this flasher installed, the signal
indicator will flash even if a turn signal
bulb is burned out. Check
the front and
rear turn signal lights regularly to make
sure they are working.
SET T CRUISE b I
Cruise Control (OPTION)
With cruise control, you can maintain a
speed
of about 25 mph (40 km/h) or
more without keeping your foot
on the
accelerator. This can really help
on long
trips.
Cruise control does not work at speeds
below about
25 mph (40 km/h).
When you apply your brakes, the cruise
control shuts off.
75
ProCarManuals.com
Page 81 of 323
To Get Out of Cruise Confro/
There are two ways to turn off the cruise
control:
Step lightly on the brake pedal; OR
Move the cruise switch to OFF.
To Erase Cruise Speed Memory
When you turn off the cruise control or
the ignition, your cruise control set
speed memory is erased.
If you have the
3800 V6 engine, cruise control memory
will also be erased when you place the
transaxle
in P (Park).
Headlights
Push the PC switch to turn on:
Parking Lights
Side Marker Lights
Taillights
Instrument Panel Lights
Pull the switch to
turn off the lights. Push the
-'D , , switch to turn on the
headlights, together with:
Parking Lights
Side Marker Lights
Taillights
Instrument Panel Lights
Pull the switch to turn
off the lights.
ProCarManuals.com
Page 82 of 323

Features & Controls
80
Operation of Lights
Although your vehicle’s lighting system (headlamps, parking lamps, fog lamps,
side marker lamps and tail lamps) meets
all applicable federal lighting
requirements, certain states ahd provinces
may apply their own lighting regulations
that may require special attention before
you operate these lamps. For example,
some jurisdictions may require that you
operate your lower beam lamps with fog
lamps at all times, or that headlamps be
turned on whenever you must use your
windshield wipers. In addition, most
jurisdictions prohibit driving solely with parking lamps, especially at dawn or
dusk. It is recommended that you check
with your own state or provincial
highway authority for applicable lighting
regulations.
Lights On Reminder
If you turn the ignition key to the Off or
Lock position while leaving the lights
on, you will hear a warning chime.
I
Headlight High-Low Beam
Changer
To change the headlights from high to
low beam, or low to high, simply pull
the turn signal lever all the way toward
you. Then release it.
When the high beams are on, a blue
light on the instrument cluster also will
be on.
ProCarManuals.com
Page 83 of 323
Fog Lights
Slide the lower control up to turn on the
fog lights, down to turn
them off.
Your parking lights or headlights must
be on for
the fog lights to go on.
When you turn on your high beams, the
fog lights will go off. The fog lights will
come back on when you switch from
high beams to low beams.
High beams are not recommended for
driving in fog. See the
Index under
Driving in Fog, Mist and Haze.
Instrument Panel htensity
Control
Slide the upper control up to increase
the brightness of the instrument panel
lights, down to decrease
the brightness.
Slide the control all the way down to
turn them off.
Interior Lights Control
Slide the upper control all the way up to
turn on the interior lights.
ProCarManuals.com
Page 84 of 323
Features di Controls
82
Windshield Wipers
The windshield wiper and washer
controls are located to the right
of the
instrument cluster.
For a Single Wiper Cycle: Press the
switch marked
MIST and release. For
more cycles, press and hold the switch.
For Pulse Delay Wiper Cycles: The
pulse delay cycle system allows
you to
set the wiper speed as slow as
20
seconds between cycles, or faster. Pulse
delay cycles are very useful in light rain
or snow. Slide the upper control
to the
DELAY area. The lower the position,
the slower the cycle; the higher the
position, the faster the cycle.
For Steady Wiper Cycles: Slide the
upper control either to the
LO or HI
position, depending on the wiper speed
you want.
ProCarManuals.com
Page 87 of 323
I
Overhead Console
The front overhead console has reading
lights, two switches for the optional
power sliding door, storage
compartments, including one for your
garage door opener and one for
sunglasses, a compass and an outside
temperature display.
Reading Lights
To turn on or off either reading light,
press the switch next to it.
To adjust the
aim of the lights, pivot the lamps
in their
sockets.
Garage Door Opener
Compartment
You can store your garage door opener
in the front compartment of your
overhead console, and operate
it from
this position.
To install your garage door
opener, follow these instructions:
1. Open the compartment by pressing
the latch forward. Remove the piece
of self-sticking Velcro?
85
ProCarManuals.com
Page 91 of 323

lnterior Lights Override Switch
This switch is located to the left of the
cigarette lighter in the center instrument
panel console. It has two positions,
DOOR (on) and OW, and overrides all
interior lights except the reading lights.
The interior lights
go on each time you
open the doors.
You can turn off these
lights
so that the doors may be left open
without
running down the battery by
turning the interior lights override
switch to
OW.
Center Dome Light
Located in the center of your vehicle,
this light has no switch
of its own. It
will
go on each time you open the
doors, unless you
turn the interior lights
override switch in the center instrument
panel console to
OFF.
If you have the optional rear climate
control, you
will not have a center dome
light.
Rear lnterior Lights
The rear dome light also has two
reading lights.
The dome light will
go on each time you
open the doors, unless
you turn the
interior lights override switch in the
center instrument panel console to
Om.
To turn. on either reading light, press the
switch next
to it.
There are
also two lights in the liftgate
to light the rear cargo area. These will
come
on each time you open the liftgate,
unless
the interior lights override switch
is in the
OFF' position.
89
ProCarManuals.com