Downloaded from www.Manualslib.com manuals search engine Q: What’s wrong with this?
A: The belt is twisted across the body.
You can be seriously injured by a twisted belt; In a crash, you
wouldn’t have the full width of the belt to spread impact forces.
If a belt is twisted, make it straight so it can work properly, or
ad- --our dealer to fix it.
26
Downloaded from www.Manualslib.com manuals search engine While the tires available as standard or optional equipment on General
Motors vehicles may vary
with respect to these grades, all such tires meet
General Motors performance standards and have been approved for use
on General Motors vehicles. All passenger type
(P Metric) tires must
conform to Federal safety requirements in addition
to these grades.
meel Alignment and Tire Balance
The wheels on your vehicle were aligned and balanced carefully at the
factory to give
you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels aligned again.
However,
if you notice unusual tire wear or your vehicle pulling one way
or the other,
the alignment may need to be reset. If you notice your
vehicle vibrating
when driving on a smooth road, your wheels may need
to be rebalanced.
Wheel Replacement
Replace any wheel that is bent, cracked or badly rusted. If wheel nuts
keep coming loose, the wheel, wheel bolts, and wheel nuts should be
replaced. If the
wheel leaks air out, replace it (except some aluminum
wheels, which can sometimes be repaired). See your Cadillac dealer if any
of these conditions exist.
Your dealer
will know the kind of wheel you need.
Each new
wheel should have the same load carrying capacity, diameter,
width, offset, and be mounted the same way as the one
it replaces.
If you need to replace any of your wheels, wheel bolts, or wheel nuts,
replace them only
with new GM original equipment parts. This way, you
will be sure to have the right wheel, wheel bolts, and wheel nuts for your
Cadillac model.
312
Downloaded from www.Manualslib.com manuals search engine Right Bank ......................................... 1-3-5-7
Camshaft ................... Induction Hardened Cast Grey Iron
Drive 5pe
........ Single Row / Staged Drive S mm Roller Chain
Main Bearings
......................................... Five
4.9 LITER ENGINE
Displacement ............................... .4.9L (300 cu.in.)
No. of Cylinders .............................. 8 - 90 Degree V
Power (Acc.
to SAE 51349) ............... 200 (bhp) @ 4100 rpm
Torque (ACC. to SAE 51349)
............ 275 (lbs. ft. @ 3000 rpm
Bore
....................................... 92mm (3.623 in.)
Stroke
..................................... 92mm (3.623 in.)
Compression Ratio
.................................... 951
Cylinder Block
........................... Die Cast Aluminum
Cylinder Block Bore Liners
......................... Cast Iron
Cylinder Head
.................................... Cast Iron
Intake Manifold
.............................. Cast Aluminum
Valve System
.......................... Roller Hydraulic Lifters
Intake Valve
................................ 45mm (1.772 in.)
Exhaust Valve
............................... 3Smm (1.496 in.)
Pistons
...................................... Cast Aluminum
Firing Order
.................................. 1-8-4-3-6-5-7-2
Left Bank
.......................................... 1-3-5-7
Right Bank
......................................... 2-4-6-8
Camshaft
............................................. Steel
Width..
.................................... 16.2mm (0.64 in.)
Pitch
...................................... 12.7mm (0.50 in.)
Drive Type
.......................................... Chain
Crankshaft
............................. Pearlitic Nodular Iron
MainBearings
........................................... 5
..................................... 250 (kW) @ 4100 rpm
..................................... 375 (N-m @ 3000 rpm 1
346
-
..
-
C.
Downloaded from www.Manualslib.com manuals search engine FLUID CAPACITIES
r
Transaxle (4T60E) ............................. .20 pts. (9.5 L)
Transaxle (4T80E) .............................. 30 pts. (14 L)
Engine Oil (4.9 L) ............................ 5 quarts (4.7 L)
With Filter Change .......................... .5.5 qts (5.2 L)
Engine Oil (4.6
L) .............................. 6.5 qts (6.2 L)
With Filter Change
............................ 7 qts (6.6 L)
Engine Cooling System ........................ 12.3 qts (1 1.7 L)
Fuel Tank ................................ 19.8 gallons (75 L)
Power Steering
.............................. 1.3 quarts (1.2 L)
Windshield Washer Reservoir .................. 4.2 quarts (4.1 L)
i TIGHTEN TORQUE
i
r
KEHICLE DIMENSIONS
F EldoradoETC
Spark Plugs (4.9 L) ........................ .20 N-m (15 lbs. ft.)
Spark Plugs (4.6
L) ......................... 15 Nom (1 1 lbs. ft.)
Oil Pan Drain Plug (4.9 L) .................. .30 N-m (22 lbs. ft.)
Oil Pan Drain Plug (4.6
L) .................. .20 N-m (15 lbs. ft.)
f,: Shipping Weight .......................... 3516 lbs. (1594.7 kg)
Shipping Weight (ETC)
..................... .3695 lbs. (1679 kg)
Wheel Base
................................ 108 in. (2743 mm)
Length
.................................. ,202.2 in. (5135 mm)
Height
................................... .54.0 in. (1371 mm)
Width.
................................... .74.3 in. (1887 mm)
Front Tread
............................... .60.9 in. (1547 mm)
Rear Tread ............................... .60.9 in. (1547 mm)
T ! !
rl
349
