1993 BUICK ROADMASTER window

Or, the equipment for the wagon is in the rear storage
compartment.
..
a
To access the equipmentin your wagon, turn the slotted
release
button located on the rear,edge of thk cover.
Rempve the
covef by pulliing, it away fkom the window
and then sliding it toward the rear, Ming it up and out
of thelower track. The wagon tire changing equipmen1
can
now be removed.

Center High Mounted Stop Light
Replacement
Lift up the tailgate window. Unscrew the two screws. Bring down the bulb assembly. Pull a bulb out of.its
retainer and replace. Reverse the,steps to reassemble.
Loading Your Vehi.cIe
proper size, speed rating and recommended inflation
pressures for the tires
on your vehicle. It also gives you
important information about the number
of people that
can be in your vehicle and the total weight that you can
carry.
This weight is called the Vehicle Capacity Weight
and includes the weight of
all occupants, cargo, and all
nonfactory-installed options.
@I OCCUPAN'TS TIRE-LOADING
INF0,RMATlON
.
V:EHICLE CAP, WT.
FRT.. CTR. RR. TOTAL LBS. KG
1
MAX. LOADING & GVWR SAME AS VEHICLE
CAPACITY
WEIGHT XXX COLD TIRE
TIRE SIZE
SPEED PRESSURE
.RTG PSI/KPa
FRT.
RR.
SPA.
IF TIRES ARE HOT, ADD 4PSI/28KPa
SEE OWNER'S 'MANUAL FOR ADDITIONAL
INF0,RMATlON
ll]mp ,$$$#/:::
Two labels on your vehicle show how much weight it
may properly carry. The Tire-Loading Information label
found -on- the rear edge of the driver's door tells you the
Y
MFD BY GENER-At MOTORS CORP
DATE GVWR GAWR FRT GAWR
RR
THIS VEHICLE CONFORMS TO 'ALL APPLI- CABLE US. FE,DE.RAL MOT0.R'
VEH'ICLE
SAFETY, BU.MPER,-AND THiEFT PREVENTI0.N
STANDARD,S IN EFFECT ON THE DATE
OF
MANUFACTURE SHOWN ABOVE.
~i~,l\i$;~!~~!~
The other label is the Certification 'label, found on the'
rear edge of the driver's do,ar. It tells you the gross
weight capacity
of your vehicle, called the GVWR
(Gross Vehicle' Weight Rating). The GVWX includes the.
weight of the vehicle, all occupants, fuel and cargo.
269

Finally, if needed, clean lightly with solvent-type Care of Safety Belts
cleaner.
Combination Stains: Like candy, ice cream,
mayonnaise, chili sauce and unknown stains.
@ Carefully scrape off excess stain, then clean with
If a stain remains, clean it with solvent-type cleaner.
cool water and allow to dry.
Cleaning Vinyl .or Leather
Just use warm water and a clean cloth.
Rub with a clean, damp cloth to remove dirt. You
may have to do it more than once.
Things
like tar, asphalt and shoe polish will stain if
you don’t get them off quickly. Use a clean.-clQth -and.
solvent-type vinylfleather cleaner.
Cleaning the Top of the Instrument
Panel
Use only mild soap and water to clean the top surtaces
,of the instrument panel. Sprays containing silicones or
.
waxes may cause annoying reflections in the windshield
and even make
it difficult to see through the windshield
under certain conditions.
-
Keep belts clean and dry.
/L CAUTIOC
Do not bleach or dye satety belts. IT you UO, I
may severely weaken them. In a crash they
might not
be able to provide adequate
protection. Clean safety belts only with
mi
soap and lukewarm water.
I
Glass
Glass should be cleaned often. GM Glass Cleaner (GM
Part No. 1050427) or a liquid household! glass cleaner
will remove normal tobacco smoke and dust films.
Don’t use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals
OR the inside rear
window, since thay may have to be scraped
off later. If
abrasive cleaners are used on the inside of the rear
window, an electric defogger element may be damaged.
Any temporary license should not be attached across the defogger grid.

The fuse chart, below, shows how to tell a blown fuse
from a good fuse.
GOOD
FUSE
I
BLOWN
-FUSE
I
GM PARTNO.. ' RATING ' LJ COLOR
12004003 ................... 3 AMP VIOLET
I2004005 ................... 5 AMP TA-N- .
12004006 ................... 7.5 AMP BROWN
12004007 ................... IO AMP . RED
12004008 ................... 15 AMP LIGHT BLUE
12004009 ................... 20 AMP YELLOW
12004010 ................... 25 AMP WHITE
1200401 1 .................... 30 AMP LI'GHT GREEN
Headlights
The headlight wiring is protected by a circuit breaker in
the light switch. An electrical overload will cause the
lights to
go on and off, or in some cases to remain off. If
this happens, have your headlight wiring checked right
away.
Windshield Wipers.
The windsheld wiper motor is protected hy a circuit
breaker and a fuse.
If the motor overheats due to heavy
snow, etc., the wiper will stop until the motor cools.
If
the .overload is caused by some electrical problem and
not snow, etc., be sure to get it fixed.
Power Windows and Other Power Options
Circuit .breakers in the fuse panel protect the power
windows and other power accessories. When the current
load is too heavy, the circuit breaker opens. and closes,
protecting the circuit until the problem is fixed or goes
away.
Lumbar Power Seat Controls
If you have the lumbar controls for the power seat, there
is a
10 amp fuse under each seat 'wrapped in tape.
Should your
seat ever not work, this fuse should be
checked.