1993 BUICK LESABRE service

At Least Once a Month
1 CHECKOR SERVICE
I WHAT TO DO
~ ~~~
Tire Inflation Check tire inflation. Make sure
they
are inflated to the pressures specified
on the Tire-Loading Information label located on the rear edge of the
driver’s door. See “Tires”
in the
Index for further details.
At Least Once a Year
CHECK OR
SERVICE
Key Lock
Cylinders
Body
Lubrication
WHAT TO DO
Lubricate the key lock cylinders with
the lubricant specified in Section
D.
Lubricate all body door hinges. Also
lubricate all hinges and latches,
including those
for the hood, glove
box door and console door. Section
D tells you what to use.
CHECK OR
SERVICE
Starter Switch
L
WHAT TO DO
CAUTION: When you are doing
this check, the vehicle could move suddenly.
If it does, you
or others could be injured. Follow the steps below.
1. Before you start, be sure you have
enough room around
the vehicle.
2. Firmly apply both the parking brake
(see “Parking Brake” in
the Index if
necessary) and the regular brake.
NOTE:
Do not use the accelerator
pedal, and be ready to turn
off the
engine immediately
if it starts.
3. Try to start the engine in each gear.
The starter should work only
in “P’
(Park) or “N’ (Neutral). If the starter
works
in any other position, your
vehicle needs service.

CHECK OR
SERVICE
Brake-
Transmission Shift Interlock
BTSI
Automatic
Transmission)
WHAT TO DO
CAUTION: When you are doing
this check, the vehicle could
I
move suddenly. If it does, you
or others could be injured.
Follow the steps below.
1. Before you start, be sure you have
enough
room around the vehicle. It
should be parked on a level surface.
2. Firmly apply the parking brake (see
“Parking Brake”
in the Index if
necessary).
NOTE: Be ready to apply the regular
brake immediately
if the vehicle
begins
to move.
3. With the engine off, turn the key to
the
“RUN” position, but don’t start
the engine. Without applying the
regular brake, try to move the shift
lever out of
“P’ (Park) with normal
effort. If the shift lever moves out of
“P’ (Park), your vehicle’s BTSI
needs service.
CHECK OR
I SERVICE I WHAT TO DO
Steering While parked, and with the parking
Column Lock brake set, try to
turn the key to
“LOCK” in each shift lever position.
The key should turn to “LOCK”
only
when the shift lever is in “P’
(Park).
The key should come out only in
“LOCK.”
290

CHECK OR
SERVICE
Parking Brake
and Automatic
Transmission
“P” (Park)
Mechanism
Check
WHAT TO DO
CAUTION: When you are doing
this check, your vehicle could
begin
to move. You or others
could be injured and property
could be damaged. Make sure
there
is room in front of your
vehicle in case it begins to roll.
Be ready to apply the regular
brake at once should the
-
Park on a fairly steep hill, with the
vehicle facing downhill. Keeping
your foot on the regular brake, set the
parking brake.
To check the parking brake: With
the engine running and
transmission in
“N’ (Neutral),
slowly remove foot pressure from
the regular brake pedal. Do this
until the vehicle is held by the
parking brake only.
mechanism’s holding ability: Shift
to “P’ (Park). Then release all
brakes.
To check the “P” (Park)
CHECK OR
I SERVICE I WHAT TO DO
Underbody
Flushing At least every spring, use plain water
to flush
any corrosive materials from
the underbody. Take care to clean
thoroughly any areas where mud and
other debris can collect.

Section C: Periodic Maintenance
Inspections
Listed below are inspections and services which should
be performed at least twice a year (for instance, each
spring and fall). You should let your
GM dealer’s
service department or other qualified service center do
these jobs. Make sure any necessary repairs are completed at once.
INSPECTION
OR SERVICE ______~
Steering,
Suspension and
Front-Wheel-
Drive
Axle
Boot and Seal
Inspection
Exhaust System Inspection
Throttle
Linkage
Inspection
WHAT SHOULD BE DONE
Inspect the front and rear suspension
and steering system for damaged,
loose or missing parts, signs of wear,
or lack of lubrication. Inspect the
power steering lines and hoses for
proper hookup, binding,
leaks,
cracks, chafing, etc. Clean and then inspect the drive axle boot seals for
damage, tears
or leakage. Replace
seals if necessary.
Inspect the complete exhaust system. Inspect the body near the
exhaust system. Look for broken,
damaged, missing or out-of-position
parts as well as open seams, holes,
loose connections, or other
conditions which could cause a heat
build-up in the floor pan or could let
exhaust fumes into the vehicle. See
“Engine Exhaust” in the Index.
Inspect the throttle linkage for
interference or binding, and for
damaged
or missing parts. Replace
parts as needed.

INSPECTION OR SERVICE
Brake System
Inspection
WHAT SHOULD BE DONE
Inspect the complete system. Inspect
brake lines and hoses for proper hookup, binding, leaks, cracks,
chafing, etc. Inspect disc brake pads
for wear and rotors for surface
condition. Inspect other brake parts, including calipers, parking brake,
etc. Check parking brake
adjustment.
You may need to have
your brakes inspected more often
if
your driving habits or conditions
result in frequent braking.
NOTE:
A low brake fluid level can
indicate worn disc brake pads which
may need to be serviced. Also,
if the
brake system warning light stays on
or comes on, something may be
wrong with the brake system. See
“Brake System Warning Light” in
the Index. If your anti-lock brake
system warning light stays
on or
comes on, something may be wrong
with the anti-lock brake system. See
“Anti-Lock Brake System Warning
Light” in the Index.
Section D: Recommended Fluids and
Lubricants
NOTE: Fluids and lubricants identified below by name,
part number
or specification may be obtained from your
GM dealer.
FLUID/LUBRICANT
GM Goodwrench Motor Oil or
equivalent for API service SG
Energy Conserving I1 oils of the
proper viscosity. The
“SG’
designation may be shown alone
or
in combination with others,
such as “SG/CC,” “SG/CD,” or
“SF,SG,CC,” etc.
To determine the
preferred viscosity for your vehicle’s
engine, see “Engine Oil’’ in the
Index.
50/50 mixture of water (preferably
distilled) and good quality ethylene
glycol base antifreeze (GM Part
No.
1052753 or equivalent) conforming
to GM Specification 1825M or
approved recycled coolant
conforming to GM Specification
1825M.
293
-

Section E: Maintenance Record
After the scheduled services are performed, record the
date, odometer reading and who performed the service
in
the columns indicated. When completing the
Maintenance Performed column, insert the numbers from
the Schedule
I or Schedule I1 maintenance charts
which correspond
to the maintenance performed. Also,
you should retain all maintenance receipts. Your owner
information portfolio is
a convenient place to store
them.
Maintenance Record
ODOMETER
DATE MAINTENANCE PERFORMED SERVICED
BY READING
295

@ Part 8 Customer Assistance Information
I
Here you will find out how to contact Buick if you need assistance. This part also tells you how to obtain service
publications and how
to report any safety defects.
Part
8 includes:
Customer Satisfaction
.............................................................. 297
Customer Assistance for Hearing/Speech Impaired ........................................ 298
Reporting Safety Defects ............................................................ 299
ServicePublications ................................................................ 300
Customer Satisfaction Procedure
Your satisfaction and goodwill are important to your
dealer and Buick. Normally,
any problems with the sales
transaction or the operation
of your vehicle will be
resolved by your dealer’s Sales or Service Departments. Sometimes, however, despite the best intentions of all
concerned, misunderstandings can occur. If your
concern has not been resolved to your satisfaction, the
following steps should be taken:
STEP ONE -- Discuss your problem with a member of
dealership management. Complaints can often be
quickly resolved at that level.
If the matter has already
been reviewed with the Sales, Service, or Parts Manager,
contact the owner of
the dealership or the General
Manager.

Service Publications
Information on how to obtain Product Service
Publications, Subscriptions and Indexes
as described
below is applicable only
in the fifty U.S. states (and the
District of Columbia) and only for cars and light trucks
with GVWR less than
10,000 pounds (4 536 kg).
In Canada, information pertaining to Product Service
Bulletins and Indexes can be obtained by writing to:
General Motors of Canada Limited
Service Publications Department
1908 Colonel Sam Dr.
Oshawa, Ontario
L1H 8P7
Buick regularly sends its dealers useful service bulletins
about Buick products. Buick monitors product
performance in the field. We then prepare bulletins for
servicing our products better. Now, you can get these
bulletins too. Bulletins cover various subjects. Some pertain to the
proper use and care of your vehicle. Some describe
costly repairs. Others describe inexpensive repairs which, if done on time with the latest parts, may avoid
future costly repairs. Some bulletins tell a technician
how to repair
a new or unexpected condition. Others
describe a quicker way to fix your vehicle. They can
help a technician service your vehicle better.
Most bulletins apply to conditions affecting a small
number
of cars or trucks. Your Buick dealer or a
qualified technician may have to determine
if a specific
bulletin applies to your vehicle.
You can subscribe to all Buick bulletins. This way you’ll
get them as they come out.
You can wait a while and get
an index to the bulletins.
You can also get individual
bulletins. However, you’ll need
the index to identify
them.
300