Page 202 of 324

The coolant should be at or slightly above the “FULL
HOT” mark. If it isn’t, you may have a leak in the
radiator hoses, heater hoses, radiator, water pump or
somewhere else in the cooling system.
A CAUTION:
Heater and radiator hoses, and other engine
parts, can be very
hot. Don’t touch them. If
you
do, you can be burned.
Don’t
run the engine if there __ a leak. If you
run the engine, it could lose all coolant. That
could cause an engine fire, and you could be
burned. Get any leak fixed before you drive the
vehicle.
If there seems to be no leak, check to see if the electric
engine
fan is running. If the engine is overheating, the fhn
should
be running. If it isn’t, your vehicle needs service.
How to Add Coolant to the Coolant Recovery Tl[)ank
If you haven’t found a problem yet, but the coolant level
isn’t above
“ADD:’ add a 50/50 mixture of clean water
(preferably distilled) and the proper antifreeze at the
coolant recovery
tank. (See “Engine Coolant” in the Index
for more information about the proper coolant mix.)
200
ProCarManuals.com
Page 203 of 324
All Cooling Systems
A CAUTION:
Adding only plain water to your c.ooling system
can be dangerous. Plain water, or some other
liquid like alcohol, can boil before the proper
coolant mix will. Your vehicle's coolant
warning system is set for the proper coolant
mix.
With plain water or the wrong mix, your
engine could get too hot but you wouldn't get
the overheat warning.
Your engine could catch
fire and you or others could be burned. Use a
50/50 mix of clean water and a proper
antifreeze.
I
I
A CAUTION:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene
glycol
and it will burn if the engine parts are hot
enough. Don't spill coolant on
a hot engine. I
201
ProCarManuals.com
Page 204 of 324
When the coolant in the coolant recovery tank is at or
above
the “FULL HOT” mark, start your vehicle. If the
overheat
warning continues, there’s one more thing you
can try. You can add the proper coolant mix directly to
the radiator, but be sure the cooling system is cool before
you do it.
I
/i CAUTION:
Steam and scalding liquids from a hot cooling
system can blow out and burn you badly. They
are under pressure, and if you turn the radiator
pllessure cap--even a little-they can -me
out at hlgh speed. NeAler turn the cap when
the cwllng qstern, Including the radiator
pressure
cap, is hot. Wait tor the cooling
system and radiator pressure cap to cool if you
ever have to turn the pressure cap.
202
ProCarManuals.com
Page 205 of 324
How to Add Coolant to the Radiator
F
1. You can remove the
radiator pressure cap
when the cooling system,
including
the radiator
pressure cap and upper
radiator hose, is no
longer hot. Turn the
pressure cap slowly to
the left until it first stops. (Don’t press down while
turning the pressure cap.)
If you hear a hiss, wait
for that to stop.
A hiss
means there
is still some pressure left. I
I
! 1 I
A
2. Then keep turning the
pressure cap, but now
push down as you turn
it. Remove the pressure
cap.
I’d 3. Fill the radiator with the
proper
mix, up to the
base
of the filler neck.
4. Then ffl the coolant
recovery
tank to the
“FULL HOT” mark.
J
= 203
ProCarManuals.com
Page 206 of 324
i
5. Put the cap back on the coolant recovery tank, but
leave the radiator pressure cap off.
k
6. Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine fan.
7. By this time, the coolant level inside the radiator filler
neck may be lower.
If the level is lower, add more of
the proper mix through the filler neck until the level
reaches the base
of the filler neck.
204
ProCarManuals.com
Page 223 of 324

.
n
Part 6 Service and Appearance Care
. .
Here you will find information about the care of your Buick . This part begins with service and fuel information.
and then
it shows how to check important fluid and lubricant levels . There is also technical information about
your vehicle. and a section devoted to
its appearance care .
Part 6 includes:
Service ........................................................................\
..... 222
Fuel ........................................................................\
...... 223
HoodRelease ....................................................................... \
226
Engine Oil ........................................................................\
. 227
Aircleaner ........................................................................\
2.3
TransaxleFluid ..................................................................... 236
Enginecoolant ..................................................................... 239
Power Steering Fluid ................................................................. 241
Windshield Washer Fluid .............................................................. 242
Brakes ........................................................................\
.... 243
Battery ........................................................................\
.... 244
BulbReplacement ................................................................... 245
Tires ........................................................................\
...... 251
Loadingyourvehicle ................................................................. 249
Appearancecare .................................................................... 258
Vehicle Identification Number (VIN), Add-on Electrical Equipment ............................ 265
Capacities and Specifications .......................................................... -270
Fuses&CircuitBreakers .............................................................. 266
ReplacementBulbs .................................................................... 269
ProCarManuals.com
Page 229 of 324
/i CAUTION:
Things that burn can get on hot engine parts
and start
a fire. These include liquids like
gasoline, oil, coolant, brake fluid, windshield
washer and other fluids, and plastic or rubber.
You or others could be burned. Be careful not
to drop
or spill things that will burn onto a hot
engine.
Before closing the hood, be sure all the filler caps are on
properly. Then just pull the hood down and close it
firmly.
Engine Oil
I‘
I
It’s a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground. The
3300 V6 engine oil dipstick is located near the front and
center
of the engine compartment.
ProCarManuals.com
Page 241 of 324

Engine Coolant
The following explains your cooling system and how to
add coolant when it is low.
If you have a problem with
engine overheating, see “Engine Overheating” in the Index. \
The proper coolant for your Buick will:
Give freezing protection down to -34°F (-37°C).
Give boiling protection up to 262” F (128” C).
Protect against rust and corrosion.
Help keep the proper engine temperature.
Let the warning lights work as they should.
What to Use: Use a mixture of one-half clean water
(preferably distilled) and one-half antifreeze that meets
“GM Specification 1825-Mi’ which won’t damage
aluminum parts. You can also use a recycled coolant
conforming to GM Specification 1825-M with a complete
coolant flush
and refill. Use GM Engine Coolant
Supplement
(sealer) with any complete coolant change. If
you use these, you don’t need to add anything else.
I
A CAUTION:
Adding only plain water to your coollng system
can
be dangerous. Plain water, or some other
liquid
like alcohol, can boil before the proper
coolant mix will. Mur vehicle’s coolant
warning system
Is set for the proper coolant
mix. With plain water or the wrong mlx, your
engine could get too hot but you wouldn’t get
the overheat warning. bur engine could catch
fire and you or others’could be burned. Use a
50/50 mPx of clean water and a proper
antifreeze.
I
: warranty. Too much
l
and crack t
other parts
239
ProCarManuals.com