1992 MAZDA 323 oil type

SUSPENSION i
TECHNICAL DATA TD
I
Item
Specifications
Front suspension
Suspension type
strut
Sprrng type
Coil spring
Type Oil 1
Shock absorber
Damping force Extended
1,470 1150, 3N]
N [ kgf, Ibf ] at 0.3 mls
Compressed 1
686 (70, 154)
Stabilizer Type Torsion bar
Oiameter mm {in]
23.0 (0.91 )
Total toe-in mm (in>
2 f 3 (0.08 f 0.12)
degree
0*12’ f 18’
Front wheel Turning angle Inner
38* f 3*
alignment
degree Outer
300 f 30
(* Unladen)
Camber angle degree
-u045’ f 45’
Caster angle degree
2035 f 45’
Kingpin angle
degree 12010’
Rear suspension
Suspension type
I Strut
Spring type
Coil spring
Type Oil
Shock absorber
Damping force Extended
882 (90. 1981
N I kgf, Ibf t at 0.3 mis Compressed
392 140, 88 1
Stabilizer , Type Torsion bar
Diameter mm [in] ?9.? { 0.75 1
Rear wheel
Totat toe-in mm {ini
2 f 3 (0.08 f 0.12)
alignment degree
0°t2’ f 18’
(‘Unladen)
Camber angle degree
-0020’ f 45’
l Fuel tank Ml; radiator coolant and engrne oil at speciffed levels; and spare tire, jack, and tools in designated poations.
Coil Spring Specifications
Item Wire diameter Coil center diameter Free length Coil identification mark coler
mm [in] mm (in) mm (in] number
M” Ae2
Front With sunroof 14.5
IO.57 1 l32.5-158.5 15.22-6.24 ) 271.5 1 IO.69 ] 3.35 Pink
Green
.
WIthout sunroof 14.4 IO.561 1 132.6-158.6 (5.22-6.241 267.0 I IO.51 ] 3.24 Light blue Red
With sunroof 8.8-l 2.5
[ 1 0.34-0.49 128.5-131.2 15.0~5.17) 334 { 13.151 6.19 Cream -
Rear .
I 1 Without sunroof I ff;;y;4”81 I t28.6-13t.j [5.06--5.16) / 335 113.19) 1 6.23 1 Pink 1 - I
l I Main rdentrficatlon mark color: Indicated on second coil from bottom.’ l 2 Auxiliary identification mark color: Indicated on third coil from buttom.
TD-13

GI Reading Wiring Diagrams
Symbols
Symbol Meaning Symbol Meaning
Battery
l Generates electricity through
Resistance 0 A resistor with a constant value.
chemical reaction. l Mainly used to protect electrical
l Supplies direct current to circuits. components in circuits by maintaining
rated voltage.
l Reading resistance values.

Ground (1)
l Connecting point to vehicle body or No.1 color band other ground wire where current flows No.2 color band
-A-
from positive to negative terminal of No.3 mbr band
battery. No.4 color band
1 l Ground (1) indicates a ground point to
body through wire harness.
Ground (2)
l Gound (2) indicates point where
component is grounded directly to
body.
Remarks
l Current will not flow through a circuit if
ground is faulty.
Fuse (1)
0 Melts when current flow exceeds that
specified for circuit, interrupts current
I__q/y)__ now.
Precautions
(box)
l Do not replace with fuses exceeding
Fuse (2) specified capacity.
(Cartridge)
Main fuse/Fusible
Transistor (1)
l Electrical switching component. l Turns on when voltage is applied to Motor
0 Converts electrical energy into
mechanical energy.
Transistor (2)
0 Reading code. a Pulls in and discharges gases and
liquids.
Number of temtinak
Lamp l Emits light and generates heat when Current flows through filament. Cigarette lighter l Electrical coil that generates heat.