Downloaded from www.Manualslib.com manuals search engine 5 CONNECTIONS
All input and output connections are made via a 48-pin AMP
connector.
TERMINAL NO. DESIGNATION
-----------------------------------------------------------------
01A - NC (no connection)
02A - NC
03A - NC
04A - NC
05A - NC
06A - Diagnostics initialise input
07A - A/C switch input signal
08A - A/C clutch input signal (not used)
09A - Rev. counter output signal
10A - Diagnostic lamp output signal
11A - Sensor/signal ground connection
12A - Sensor/signal ground connection
13A - NC
14A - NC
15A - NC
16A - Diagnostic output signal to D-Teq
17A - Sensor/signal ground connection
18A - Diagnostic input signal from D-Teq
19A - Immobiliser output signal
20A - Sensor/signal ground connection
21A - Immobiliser input signal
22A - Sensor/signal ground connection
