table. Bleed air from system. Check fluid level. Check for leaks. Adjust alignment (if necessary).
POWER STEERING PUMP
Removal & Installation
1. Raise and support front of vehicle. On MX-6 and 626, remove right wheel and splash shield. On all
models remove belt, alternator and hydraulic lines from pump.
2. On Protege and 323, disconnect air cleaner duct and pressure switch. On all models, cap lines to prevent
contamination. Remove bracket-to-pump bolts.
3. To install, reverse removal procedure. Adjust belt tension. See POWER STEERING BELT
DEFLECTION TABLE under ADJUSTMENTS. Bleed air from system. Check for leaks.
OVERHAUL
STEERING GEAR
NOTE: See Fig. 2
-8 for exploded views of rack and pinion steering gears.
1991 Mazda MX-5 Miata
STEERING GEAR - POWER RACK & PINION 1991 STEERING Mazda - Power Rack & Pinion
Microsoft
Sunday, July 05, 2009 2:10:15 PMPage 6 © 2005 Mitchell Repair Information Company, LLC.
Courtesy of MAZDA MOTORS CORP.
TORQUE SPECIFICATIONS
TORQUE SPECIFICATIONS
ApplicationFt. Lbs. (N.m)
A/C Compressor Bracket
MX-3, Protege & 32317-26 (23-35)
MX-5 Miata11-16 (15-22)
Alternator Top Bolt27-38 (37-52)
Camshaft Sprocket Bolt36-45 (49-61)
Crankshaft/Timing Belt Sprocket Bolt
1986-9180-87 (109-118)
1992-95116-123 (157-167)
Power Steering Pump-To-Bracket Bolt
MX-3, Protege & 32327-38 (37-52)
Timing Belt Tensioner Bolt
DOHC27-38 (37-52)
SOHC14-19 (19-26)
INCH Lbs. (N.m)
Camshaft/Rocker Cover Bolt
DOHC & SOHC (Top)43-78 (5-9)
SOHC (Timing Belt Cover-To-Camshaft Cover)69-95 (8-11)
Crankshaft Pulley Bolts109-152 (12-17)
1991 Mazda MX-5 Miata
MAZDA 1.6L & 1.8L 4-Cylinder - 1986-95
Microsoft
Sunday, July 05, 2009 2:12:44 PMPage 11 © 2005 Mitchell Repair Information Company, LLC.
