1990 FORD SIERRA wheel

Wheels
pA
The XR4 is a unique application for road wheels. They are
designed for use with (hub-centric) wheels in a 35-40mm
offset- not the most common application here in the USA.
We import factory Ford European Ford "Rally Sport" brand
wheels, or proven aftermarket applications, that we know fit
the car properly.
pA
6-Spoke R/S Wheel Advanced styling with flat flush
spokes, silver color- clear coat finish for added protection,
locking center cap w/ R/S logo.
6-spoke R/S Wheel (
available sizes)
(15" x 7" , 16" x 7") $209.00 each
pB 5-spoke Cosworth Wheel
Original equipment on Cosworth Escort- optional on Mondeo in
Europe (similar to 1998 SVT wheel) silver color- clear coat finish
for added protection, center cap w/ Ford oval.
5-spoke Cosworth Wheel
(available sizes)
(15" x 6") $195.00 each
(16" x 6.5", 16" x 7") $209.00 each
pC 7-Spoke "Soft Effect" Wheel Flush spoke, silver color-
clear coat finish for added protection or optional chrome finish,
locking center cap w/ Ford oval.
7-spoke "Soft Effect" Wheel (silver)
available sizes
(15" x 6", 15" x 7", 17" x 7.5") $209.00 each
7-spoke "Soft Effect" Wheel (chrome) available sizes
(15" x 6", 15" x 7", 17" x 7.5") $309.00 each
pB
pC
pD
pE
pD
5-Spoke R/S Wheel Bright diamond cut silver face with
anthracite gray on sides of spokes, clear coat finish for added
protection, locking center cap w/ R/S logo.
5-spoke R/S Wheel
(available sizes)
(15" x 7", 16" x 7", 17" x 7.5") $209.00 each
pE 5-Spoke SVT Wheel These are original equipment 1999
SVT Contour (16" x 6.5" size) and 2001 Focus SVT (17x7") wheels.
5-spoke SVT Wheel (16" x 6.5") $135.00 each
5-spoke SVT Wheel (17" x 7.0") $135.00 each
pF 5-Spoke Motorsport Wheel Exclusive for Ford by
Compmotive. Five Spokes with Motorsport logo on one spoke,
carbon look center cap w/singel hex nut center.
5-spoke Motorsport Wheel (silver)
$249.00 each
available sizes (15" x 6" or 16" x 7") ET 35/38mm
pH Turbine Wheel Exclusive for Ford by Compmotive.
Flush face turbine style wheel.
Turbine Wheel (silver)
$249.00 each
available size (16" x 7") ET 38mm
pG 5-Spoke RE Wheel Exclusive for Ford by Compmotive.
"RE" Wheel (silver)
$189.00 each
available size (15" x 6") ET 35mm
pI 6-Spoke FLN Wheel Exclusive for Ford by Compmotive.
"FLN" Wheel (silver)
$189.00 each
available size (16" x 7") ET38mm
pG
pH
pI pF
1 5

Wheels
4 Spoke "Turbo" Wheel
Stylish 4 spoke "Turbo" wheel available
in 16" diameter with either a 6" or 6.5"
width. Finish is bright silver. We highly
recommend these factory Ford wheels
for guaranteed quality fit and finish.
Center cap included.
4 Spoke "Turbo" Wheel
16 x 6" $195.00
16 x 6.5" $195.00
2 x 4 Spoke Wheel
Stylish 2 x 4 spoke wheel available
in 16 & 17" diameters from 6.5" to
7.5" widths. Finish is bright silver.
We highly recommend these factory
Ford wheels for guaranteed quality
fit and finish.
Center cap included.
2 x 4 Spoke Wheel
15 x 7" $209.00
16 x 6.5" $209.00
17 x 7.5" $209.00
TW "Thrust" Wheel
10 spoke "Thrust" light alloy
wheel with a locking center
cover. Available in charcoal
grey with polished silver lip in
15 x 7" size. A great looking
wheel at a budget price.
TW "Thrust" Wheel
15 x 7" $109.00
Wheels FYI
We offer only direct fit wheels for the Contour in the 4 x 108mm pattern and 35-40mm offset range. Most
are factory Ford or Ford Motorsport authorized wheels which guarantees quality fit and finish. BAT imports
these wheels directly from Europe and our prices include all inbound freight charges. Outbound freight
from our location to you by UPS ground will cost between 30.00 to 50.00 per set of 4 wheels- depending
on your location. Please note: We often hear horror stories from customers who have ordered wheels
from European mail-order suppliers only to receive damaged or substandard components, and now you
own it! Sending it back or trying to get the freight carrier to pay for the damage is next to impossible they
will just claim it was "improperly packed" or "it wasn't that way when it left here". Worse yet, the shipping
costs involved importing large, heavy, items like wheels can far exceed the cost of the part (expect 50.00
to 100.00 per wheel) What started out as a bargain now has become a expensive learning experience.
Avoid the hassles, let us supply your wheels to your door at a fair
price. When you do the math you will find we are saving you money.
ST200 Wheel
Stylish 14 spoke wheel available in 17" diameter with a 7" width. Factory
equipment on the Mondeo ST200. Finish is bright silver. We highly
recommend these factory Ford wheels for guaranteed quality fit and finish.
Center cap included. (wheel might requite a spacer for XR fitment)
ST200 Wheel 17 x 7" $209.00 each
1 6

Accessories
pA Scorpio R/S Rear Wing This hot looking rear wing goes a long way
in transforming Scorpio's look. For installation R/S wings will require
painting to match your cars color, and some mounting holes from the
standard spoiler will need to be filled and spot painted. Also note that a rear
brake light will need to be located elsewhere in the rear window.G306
Scorpio R/S Side Skirts Matching Rally Sport rocker panel side skirt
set looks great with above rear wing or without. Other than just good
looks, side skirts help to keep the door sides and rockers cleaner and with
less stone chips. Easy to fit, paint and install.G302S
pB Scorpio Cowl Cover What is it, and why doesn't my car have one?
This is a commonly asked question regarding this item. Ford equipped
very few Scorpios bound for the US market with these European cowl
covers. This moulded plastic cover keeps dirt, debris and small animals
from winding up in the ventilation fan and associated duct work. Clean
out this area once and for all, then install a new cowl cover- your Scorpio
will thank you.G369C
pC Mini-Lite Wheels (15" x 7") for XR4 Cars of English heritage,
XR4's included, look great on classic Mini-Lite type wheels. These
wheels are both lightweight and attractive with a bright silver clear coat
finish. Specifications: 4 x 108mm pattern, 15" x 7" size, 38mm offset,
18lbs each, center caps included.M411M
pD Thrust Wheels (15" x 7") for XR4 We are often asked to supply
inexpensive road wheels, and here they are. The Thrust is a 10 spoke
light alloy wheel with locking center cover, available in either silver, or
charcoal w/silver lip. You will not find a better quality, proper wheel
fitment for the price. Specifications: 4 x 108mm pattern, 15" x 7" size,
35mm offset, 18lbs each, locking center covers included.M411T
pE Floor Mats Foul weather mats, commonly referred to as "ice cube
trays" or "waffle mats", are made of heavy duty rubber with small
compartments to catch melting ice, water, mud etc. from your shoes or
boots. These Euro. Ford mats are the best protection for your interior for the
winter months or when going afield. Can be placed over standard plush
mats or directly on carpeting. When dirty or filled with water- remove, drain,
hose off, and reinstall. Front mats will fit both XR4 and Scorpio, rear mats
are for XR4 only.
Front Mat set M1010 Rear Mat SetM1011
First Aid Kits We are often asked to supply the First Aid kits that Ford
equips new cars with in Europe. Includes more than just a selection of
"Band-Aids". Think of it as good insurance.M102
Fuse Box Covers A common breakage item on XR4's. We have new
European Ford replacements.M474
pF Sunroof Wind Deflector The buffeting effect, and wind noise, that
takes place with the sunroof open at speed can be eliminated with a
Sunroof Wind Deflector. Tinted smoke (grey) acrylic, fits both XR4 and
Scorpio- hardware included.M307
pG Side Window Wind Deflector for XR4 A similar product to the
Sunroof Deflector the Side Window Deflector keeps the wind noise levels
to a minimum while allowing maximum ventilation. Effective even in light
rain! Tinted smoke (grey) acrylic, easy installation- no holes to drill. For
XR4 only- sold in pairs.M340WD
pB
pD
pC
pA
pE
pG pF
1 7

Accessories
pApA
Cosworth Sierra Steering Wheel This sporty 3 spoke design
leather wrapped steering wheel is standard factory issue on the Sierra
Cosworth and RS500 models. The smaller wheel diameter (13.9 inch) helps
make the steering ratio more effective and the fatter rim grip offers both comfort
and control. Wheel is available in black and included center horn button with
Ford logo and horn symbol.M322
pB Cosworth Sapphire Steering Wheel This 3 spoke leather wrapped
wheel from the Sierra Sapphire 4x4 steering wheel is a departure on the
original Coswoth version. It's wider center spokes are positioned lower for
comfortable hand position and a better view of the instrumentation. The smaller
wheel diameter (13.9 inch) helps make the steering ratio more effective and the
fatter rim grip offers both comfort and control. Wheel is available in black and
included center horn button with Ford logo and horn symbol.M322A
Standard Horn Button for the standard XR4 steering wheel we have the
European "Ford" oval logo horn button. Just the thing for finishing the interior
off while fitting Ford logos to the exterior.
Z61551
pC Contoured Dash Overlay just the ticket for covering up a cracked
vinyl dash pads which are so common on the XR4 & Scorpio. This moulded
plastic dash overlay is simple to install and covers up a world of sin, quickly
returning the interior to its original splendor.
note: supplied in black can be easily
painted to match interior color
(for XR4) M323

NEW (for Scorpio) G323
pD White Gauge Face Set Colored gauges are quite the rage. They add
a very unique look to the interior, and are easy to read in daylight or when
illuminated at night. We have a gauge face kit that will replace the standard
(black) speedo, tach/boost, fuel and water temp, gauges and indicator lamps
with a thick self adhesive mylar faces that are white in color. These gauge
faces are manufactured specially for BAT by a original equipment instrument
supplier to Ford, GM, Vauxhall so quality is outstanding. They illuminate from
the rear "back light", just as the standard gauges, and will not opaque with age
like typical cheap reproductions will. An added benefit of our gauge face kit
is the speedo is calibrated beyond 85mph all the way to 150mph. Updating
earlier cars with 85mph speedos is a snap.
(available spring 99) M341W
pE
170 mph Speedometer For the owners of land based cruise
missiles we offer the original equipment Sierra Cosworth speedometer
calibrated in mph (170 in white) and kmph (270 in yellow) with re-setable
trip-meter. A slight bit of tweaking is required to fit.
M341A
150 mph Speedometer Sierra XR4's and later Merkurs came with a more
realistic 150 mph speedometer which easily replaces the American (only
calibrated to 85 mph) version.M341
Dash Instrument Panel Bulb lamp with (white) socketM330L
Dash Warning Lamp Bulb lamp with (gray) socketM330WL
pF Torch Key & Battery complete Ford key blank and lamp/battery.
Torch key blanks and lamp batterys are also listed separately below.
C309KL
Torch Key Blank replacement key blank for XR4 (less lamp)Z61179
pG Lamp & Battery lamp and battery for XR4 & Scorpio keysC309KLB
pH Standard Keys as an extra key or an alternative to the more bulky torch
key, this European key blank has a molded plastic grip with wide ring slot with
Ford logo.
(for Scorpio) G309K (for XR4) C309K
Hatch Lock Assembly lock assem. w/housing & 2 keysM815L
Hatch Striker commonly required replacement itemM815S
Hatch Lock Retaining Clip commonly required replacement itemM815C
Complete Car Lock Set doors, hatch, ignition w/ 2 keysM309LS
pD
pE
BRAKE
pF
pHpG pC
pB
turbo
1 8

pFpG
Automotive air conditioning components seem to be difficult to source and expensive to boot. The XR4 and Scorpio are no
exception to the rule. Reason being, a functioning A/C system is considered a "must have" and some will pay almost any price
for cold air on a hot day. BAT understands that comfort is paramount, but on the other hand it should not require a second
mortgage to repair your A/C system. You will find we have a selection of high quality, economically priced A/C parts too help
keep you cool without breaking the bank.
Most A/C Components for XR4 & Scorpio are interchangeable except where noted.
pA
pI
pJ
pB
pEpD
pH
pA
Evaporator- The evaporator (alloy fin/tube design) works
as a heat exchanger. Air flowing through the core is cooled,
cleaned, and dried. It is also one of the major cost portions
of the A/C system, with the Ford original costing around
$550.00. Check out our aftermarket alternative for less than
half the cost !
M470E
pB
Expansion Valve- Meters the volume of refrigerant to the
evaporator. Expansion valve assembly should be replaced with
evaporator or if found faulty. M470EV
pC
Blower Motor- HVAC system blower motor includes motor
and fan wheel. (Scorpio) G470A (XR4) M470A
pD
Refrigerant Hoses*- The complete refrigerant hose manifold
assembly. These are specially re-manufactured units that have
the hose running to the fire wall extended so it can be routed
further away from the turbo's excessive heat. This is a very
common failure item. (XR4ti)
extended hose M470H
(Scorpio)
standard length hose G470H
*additional $100.00 core charge on this item- refundable on return
pE A/C Compressor- The compressor is one of the major cost
portions of the A/C system, with the Ford original costing upwards
of $850.00. Check out our
brand new Nippondenso A/C compressor
units that are complete including the clutch assembly.
M470C pC
pF
Clutch Assembly*- Replacement magnetic clutch
assembly. Available separately from compressor . If a clutch is all
you need we have it. M470CL
*additional $25.00 core charge on this item- refundable on return
pG Condenser- The A/C condenser (alloy tube/fin core)
is located ahead of the water radiator. Designed to cool
the compressed refrigerants air passes over the cooling
fins extracting heat to change hot gasses back to liquid
refrigerant as it cools. Again, one of the major cost
portions of the A/C system, with the Ford original costing
upwards of $600.00. Check out our aftermarket alternative
for considerable cost savings! for XR4 M470D
for Scorpio G470D
pH
Electric Fan- An alternative to the expensive original
condenser fan ($450.00). This highly efficient (1200 cfm) 16"
electric "pusher" fan moves more air
for le$$. A16F-PU
pI
Pressure Switch- The triple pressure switch assembly
engages the condenser fan and switches off the compressor clutch
with high/low pressure. Also a common failure item.
M470S
pJ Receiver/Dryer- Works as a storage/expansion tank for
refrigerant as well as a system dehumidifier. It is common to
replace the dryer when changing over to newer types refrigerants
or whenever the A/C system has been open to atmosphere as the
dryer is easily contaminated. M470R
Air Conditioning System2 4

Turbocharger
pC
pG/H/I
pF
pD
pA
pB
pE
pA Standard Wastegate Actuator Since the stock XR
wastegate is no longer available new, we supply a high quality
re manufactured unit. Internal components (diaphragm) are re-
placed and exterior is zinc plated.) M521WR
pB
Turbochargers We offer both re manufactured stock
specification and modified high performance turbos for the
XR. High quality re manufactured turbos include; new center
cartridge compressor/turbine wheel assembly with recondi-
tioned outer compressor/turbine housings, new bearings,
seals and O-rings and fasteners. Our high performance turbo
adds a few extra tweeks. A GNX compressor wheel machined
into the stock comp housing for an additional 30% airflow and
a 360 degree thrust bearing is fitted for added durability.
Turbos are fully dressed and include wastegate actuator,
base & drain gaskets and sold on a exchange "core" basis-
outright purchase will add an additional $100.00 to the cost.
Standard Reman. Turbocharger M522TR
High Performance Turbocharger M522TM
pC
Intercooler Kit If you are looking for a large high flow
intercooler kit this is the one to have. Intercooler core mounts
ahead of the steering rack in front of the engine facing the
ground. Air is ducted up and through the core. Plumbing is kept
short and allows for a larger core than what can usually be fitted
in the bumper/grille area. Kit is complete with intercooler core
(8" x 20" x 3.5"), mounting brackets, inlet plumbing pipes &
connectors, clamps, turbo output elbow, bypass valve and
additional hardware and instructions.
M522ICpD
Adjustable Boost Valve Kit Replace the troublesome
stock boost control solenoid with this easy to adjust under hood
boost valve. This kit uses a check valve to accurately control the
boost level which allows for faster turbo spool-up (reduced lag)
over typical adjustable "bleed-off" valves. This is a low cost modifi-
cation and should be a "must have" for all XR's.
M521BV
pE
Dual Port Wastegate Actuator These are new actua-
tors which feature an adjustable length rod (set boost & pre load)
and dual vacuum ports. The dual port feature permits use of a
remote mounted boost valve (see below), but can also be used
as a replacement for stock actuator.
M521WA2
pF
Cockpit Mounted Boost Valve Remote cockpit
mounted adjustable boost valve for use with dual port wastegate
actuators (see above). Vacuum signal is regulated by the in
car mounted valve and recirculated to the dual port actuator for
precise adjustment. M521TB
pG
Turbo Oil Feed Pipe is prone to cracking/leaking and
should always be replaced when a new turbo is fitted to assure
proper oil flow. Just look inside an old one and you will see
what we mean. M522P
pH
Turbo Inlet Hose we have a version of this (discontin-
ued by Ford) hose that links the turbo outlet pipe to the throttle
body. Ours is high specification 4-ply Silicone (blue) rated to
over 600 degrees, 190 psi burst pressure- better & cheaper
than the original ! M22H
pI
Stainless Base Gasket replacement for between the turbo
base and exhaust manifold. L521GT
2 5

Complete Rear Differential Assembly- New assembled
Ford rear differentials with limited slip (3.92:1 ratio). Remove
old center section as a whole and replace. Not inexpensive,
but a value when you add up the individual component costs
and the labor charges on a rebuild. $1995.00
pA
Ford LSD Unit- as standard on some European Sierra
models. For std. 7.5 ring & pinion $1425.00
Quaife LSD Unit- none better for ultimate strength and
smooth performance. For std. 7.5 ring & pinion- includes
Cosworth size (large) drive flanges.
See page 10 for more
information on this item.
M710 $1245.00
pB
Crown Wheel & Pinion- new Ford ring & pinion sets. For
automatic (3.36:1), manual ( 3.64:1), optional (3.92:1).$550.00
pBCrown Wheel & Pinion- new Ford Rally Sport 4.44 racing
ring & pinion sets.$995.00
pCBearing & Seal Repair Kit- complete differential housing,
bearings, oil seal, o'ring. (each) per side
M721 $94.50
pD
O' Ring- differential bearing housing o'ring
M722$1.98
pE
Oil Seal- differential bearing housing oil seal
M720$8.35
A
C
G
I
HJ
K
L
MNB
O
FD EC
pFOil Seal- pinion oil seal M725$13.20
pG
Flange Nut M726$3.65
pH
Flange Assembly$63.50
pI
Pinion Nut M727$13.05
pJ
Roller BearingM723 $59.00
pK
Crush Collar M729$5.49
pL
Spacer$3.75
pM
Roller Bearing M724 $59.00
pN
Shim- specify size when ordering$4.03
Gasket- Rear Differential XR4 & Scorpio M730 $8.15
pO
Differential to Body Mount -XR4 M430 $79.50
pO
Differential to Body Mount -Scorpio G430 $79.50
Rear Differential Components
Note: most differential components are similar
for XR4 and Scorpio.
34

07/30/02Price List3 6
PAGE 10 driveline components
C.V. Joint- XR & Scorpio M550B 92.50
C.V. Boot Kit- XR & Scorpio M550BK 14.90
C.V. Socket Head Cap Screw (6 per joint) M550CS 1.05ea
C.V. Locking Plate (3 per joint) M550LP 1.35ea
Axle/Halfshaft Complete* (LH)- XR & Scorpio M550L 169.50
Axle/Halfshaft Complete* (RH)- XR & Scorpio M550R 169.50
*axle/halfshaft, joints (2), boots (2), assembled/greased ready for installation
add 75.00 core charge for this item- refundable on return
Driveshaft Coupling- XR & Scorpio M17A 62.50
Drivesahft Center Support Bearing-XR M550SB 109.75
Drivesahft Center Support Bearing- Scorpio G550SB 98.00
Quaife LSD M710 1245.00
Clutch Kit Sachs- XR M519K 179.50
Clutch Kit Sachs- Scorpio G519K 257.50
Clutch Kit Sachs- XR w/ T-5 trans M519T5 179.50
H.D. Clutch Kit Centerforce (30% kit) M519C 309.95
H.D. Clutch Kit Centerforce II (50% kit) M519C2 361.98
Clutch Alignment Tool (1" 23 spline) S11H 6.00
Clutch Cable- XR4Ti M562 29.50
Clutch Cable- Scorpio G562 76.50
BAT is always testing and
developing new products....if
you don't see it listed ask... we
might have what you are looking
for, or can point you in the right
direction.
PAGE 8 brake kits & specials
Front Brake Spacial- XRM420SP 105.00
Front Brake Spacial- ScorpioG420SP 115.00
Front R/S Brake Kit 283x24mm (standard) M417 295.00
Front R/S Brake Kit 283x24mm (w/x-drill) M417A 329.00
Front R/S Brake Kit 283x24mm (standard/M1144 ) M418 339.00
Front R/S Brake Kit 283x24mm M1144/x-drill) M418A 395.00
BAT/Wilwood Brake Kit 283mm M416W 645.00
BAT/Wilwood Brake Kit 300mm M416W3 725.00
PAGE 9
rear brake components
Rear Wheel Cylinder- XRM420WC 35.95
Rear Brake Shoe Set (Motorcraft/Mintex)- XRM420R 49.95
Rear Brake Drum
- XRM420RD 74.00
Rear Brake Drum (grooved)
- XRM420RDG 129.50Aeroquip Rear Brake Lines (pair)- XRM419R 47.50
Rear Brake Line O.E. Rubber (each)- XR4 (1985-89)M419SR 27.45
Aeroquip Rear Brake Lines (4 line set)- ScorpioG419R 85.00Rear Brake Hardware Kit- XR M420K5 25.60
Rear Brake Special- XR M420RSPL 125.00
Rear Disk Brake Kit- XR M420RK 689.00
Hand Brake Cable- XR M564 44.00
Handbrake Cable- Scorpio G564 44.00
Hand Brake Cable- Cosworth Z16567 44.00
Rear Caliper* (specify left or right) for M420RK kit127.50
*this item requires an additional 75.00 core charge refundable upon core return
Rear Rotor (each) for M420RK kit52.50
Rear Brake Pad (set) for M420RK kit25.00
Rear Rotor (standard)- Scorpio (each)G425R 39.75
Rear Rotor (x-drilled)- Scorpio (each)G425RCD 92.00Rear Caliper (left)- Scorpio (each)G420RL 124.50
Rear Caliper (right)- Scorpio (each)G420RR 124.50
*this item requires an additional 75.00 core charge refundable upon core returnRear Brake Pad Set- Scorpio (Semi-Metalic)G420R 39.00
ABS Brake Sensor Scorpio/XR4- Rear G420SR 177.25
PAGE 7 front brake components
Front Caliper* (left)- XR & Scorpio M420CL 64.75
Front Caliper* (right)- XR & Scorpio M420CR 64.75
M420CL/CR calipers are not supplied with slide pins or bushings (available below)
Front Caliper Complete* (LH) includes mount & pads M420CL-L 90.00
Front Caliper Complete* (RH) includes mount & pads M420CL-R 90.00
*this item requires an additional 75.00 charge refundable upon core return
Caliper Repair Kit- XR & ScorpioM420K4A 55.00
Caliper Seal Kit-
XR & ScorpioM420K4 17.75
Caliper Slide Bushings (2) does 1 caliper M420CB 14.00
Caliper Slide Pins (2) does 1 caliper M420CP 16.35
Caliper Spring (anti-rattle) each M420CS 6.39
Front Brake Pad Set*- Mintex A/F (Semi-Metalic) M420MM 39.00
Front Brake Pad Set*- Mintex 1144 (street/competition) M420G 75.00
Front Brake Pad Set*- Mintex 1155 (full competition) M420G 112.30
*brake pads will fit both XR4 and Scorpio
Front "Low Pad" Sensor Wiring Harness- XR/Scorpio M420WS 32.49
Front Rotor (standard)- XR (each)M425 42.50
Front Rotor (standard)- Scorpio (each) G425 49.75
Front Rotor (x-drilled)- XR (each)M425CD 79.50
Front Rotor (x-drilled)- Scorpio (each) G425CD 99.00
Front Rotor (x-drilled & slotted combo)- XR (each)M425CDS 89.50
Front Rotor (x-drilled & slotted combo)- Scorpio (each)G425CDS 109.00
Master Cylinder* XR4 1985-86 (Bendix)- XRM420MC 109.50
*this item requires an additional 20.00 charge refundable upon core return
Master Cylinder* XR4 1987-89 (Bendix)- XRM420MCL 122.50
*this item requires an additional 50.00 charge refundable upon core return
Aeroquip Front Brake Lines (pair)- XR4 (1985-88)M419 42.50
Front Brake Line O.E. Rubber (each)- XR4 (1985-86)M419SF 25.75
Aeroquip Front Brake Lines (pair)- XR4 (1987-89)G419 52.40
Aeroquip Front Brake Lines (pair)- ScorpioG419 52.40
ABS Brake Sensor Scorpio/XR4- Front G420SF 179.75
PAGE 11 brake components
Brake Fluid AP550 (500 ml) MC550 10.70
Brake Fluid Wilwood 570 (355 ml) MC570 5.95
Brake Fluid Wilwood 570 (6-pack) MC57-6 33.00
Brake Fluid Wilwood 570 (24 case) MC57-C 119.00
Front Rotor Cosworth 283 x 24mm (standard) M426 75.00
Front Rotor Cosworth 283 x 24mm (X-drilled) M426CD 108.00
Front Rotor Cosworth 283 x 24mm (Grooved) M426G 130.00
Rear Rotor Cosworth 273 x 10mm (standard) 45.00
Rear Rotor Cosworth 273 x 10mm (X-drilled) 65.00
Rear Rotor Cosworth 273 x 10mm (Grooved) 86.50
Front Rotor Scorpio 260 x 24mm (standard)G425 49.75
Front Rotor Scorpio 260 x 24mm (X-drilled)G425CD 99.00
Rear Rotor Scorpio 253 x 10mm (standard)G425R 39.75
Rear Rotor Scorpio 253 x 10mm (X-drilled)G425RCD 92.10
Front Brake Kit- BAT R/S 285 x 24mm (standard) M418 339.00
Front Brake Kit- BAT R/S 285 x 24mm (x-drilled) M418A 395.00
Front Brake Kit- Wilwood 283 x 24mm M417 645.00
Front Brake Kit- Wilwood 300 x 32mm M416A 1295.00
Front Brake Kit- Wilwood 300 x 32mm (Scorpio) G416A 1395.00
Rear Brake Kit- Wilwood 300 x 21mm 1200.00
Front Wheel Bearing Kit (RH)-XR M560FR 42.00
Front Wheel Bearing Kit (LH)-XR M560FL 42.00
Front Wheel Bearing Kit (RH) Scorpio G560FR 59.00
Front Wheel Bearing Kit (LH) Scorpio G560FL 59.00
Rear Wheel Bearing Kit (RH)-XR M560RR 42.00
Rear Wheel Bearing Kit (LH)-XR M560RL 42.00
Rear Wheel Bearing Kit (RH) Scorpio G560RR 98.75
Rear Wheel Bearing Kit (LH) Scorpio G560RL 98.75
Nut- Front Hub (LH) blue M550N-LF 6.65
Nut- Front Hub (RH) yellow M550N-RF 6.65
Nut- Rear Hub (LH) white M550N-LR 7.42
Nut- Rear Hub (RH) white M550N-RR 7.42