1987 NISSAN PULSAR engine

[x] Cancel search: engine

Page 62 of 238

NISSAN PULSAR 1987  Workshop Manual 
Engine 
 
 
Main bearing cap removed showing the location of the rear seal and sealant grooves.  
until the sealant appears at the inner, lower edge of the 
bearing cap to cylinder block joint. Insta

Page 63 of 238

NISSAN PULSAR 1987  Workshop Manual 
Engine 
edge of the bearing cap to cylinder block joint. Install 
the bearing cap bolts and tighten to the specified 
torque.
 
(17) Lubricate the l i p  of the new oil seal with 
lithium  grease  an

Page 64 of 238

NISSAN PULSAR 1987  Workshop Manual 
64 Engine 
 automatic transaxle models  the complete drive plate 
must be renewed.
 
(3)  Inspect the drive plate  bolt holes for elonga- 
tion which is caused by  loose retaining bolts. 
(4)  Inspec

Page 65 of 238

NISSAN PULSAR 1987  Workshop Manual 
Engine 65 
 (4) Hold  the nut and remove the  mounting 
through bolt.  (5) Remove the bolts retaining the mounting to 
the transaxle and maneuver the mounting from the 
engine compartment.  (6) If ne

Page 66 of 238

NISSAN PULSAR 1987  Workshop Manual 
66 Engine 
 
View of the rear engine mounting. Automatic transaxle models. 
(4) Remove   the   bolt   retaining   the   exhaust 
mounting to the engine mounting bracket.  (5) Remove the engine mounti

Page 67 of 238

NISSAN PULSAR 1987  Workshop Manual 
Engine 67 
(6)   Carefully inspect the exhaust system and  (1)   Install all components and check the system 
discard any components which are cracked, worn or  for correct pos itioning before tighte

Page 68 of 238

NISSAN PULSAR 1987  Workshop Manual 
68 
COOLING AND HEATING SYSTEMS 
SPECIFICATIONS 
Coolant capacity ........................................   6.0 liters 
Thermostat: 
Opening temperature...........................    91 deg 
C
 
Ful

Page 69 of 238

NISSAN PULSAR 1987  Workshop Manual 
Cooling and Heating Systems 69
 
 the cylinder head or cylinder block and renew the 
cylinder head gasket.
 
(2)   Crack in the cylinder head or cylinder block: 
Repair or renew as necessary.
 
NOTE;