MOLDING AND GARNISH 1 4
TRUNK LID MOLDING
(SEDAN AND HATCHBACK)
Removal and Installation
1. Remove the rear finisher.
2. Remove the nuts and screws and remove the trunk
lid molding.
3. Install in the reverse order of removal.
CENTER PILLAR GARNISH
(SEDAN AND HATCHBACK)
Removal and Installation
1. Remove the seat belts.
2. Remove the front header trim.
3. Remove the center pillar trim.
4. Remove the nuts with a deep socket wrench, then
remove the garnish.
5. Install in the reverse order of removal.
76G14X020
REAR FINISHER (COUPE/MX-6 AND SEDAN)
Removal and Installation
1. Remove the nuts and the rear finisher.
2. Install in the reverse order of removal.
76G14X-021
REAR FINISHER (HATCHBACK)
Removal and Installation
1. Remove the hatchback door side trims.
2. Remove the hatchback door lower trim.
3. Remove the hatchback door screen.
4. Remove the nuts and the rear finisher.
5. Install in the reverse order of removal.
76G14X-022
14—41
