1986 TOYOTA LAND CRUISER wiper fluid

BE-6
- BODY ELECTRICALTROUBLESHOOTING
2379 Author
: Date
:
2004 LAND CRUISER (RM1071U) Rear washer motor does not operate.
1. Rear Washer Motor
2. Rear Washer Switch
3. Wire HarnessBE-52
BE-52
-
Washer fluid does not operate.1. Washer Hose and Nozzle-
*1: Inspect wiper arm and blade set positions.
COMBINATION METER (Meter Gauges and Illumination):
SymptomSuspect AreaSee page
Tachometer, fuel gauge and engine coolant temperature gauge do
not operate.1. GAUGE2 Fuse
2. Combination Meter
3. Wire Harness-
BE-58
-
Speedometer does not operate.
1. Speed Sensor
2. Combination Meter
3. Wire HarnessBE-63
BE-58
-
Tachometer does not operate.
1. Igniter
2. Combination Meter
3. Wire HarnessIG-1
BE-58
-
Fuel gauge does not operate or is in abnormal operation.
1. Fuel Receiver Gauge
2. Fuel Sender Gauge
3. Combination Meter
4. Wire HarnessBE-63
BE-63
BE-58
-
Oil pressure gauge does not operate.
1. Oil Pressure Receiver Gauge
2. Oil Pressure Sender Gauge
3. Combination Meter
4. Wire HarnessBE-63
BE-63
BE-58
-
Voltmeter does not operate.
1. Voltmeter
2. Combination Meter
3. Wire HarnessBE-63
BE-58
-
Engine coolant temperature gauge does not operate or is in ab-
normal operation
1. Engine Coolant Temperature Receiver Gauge
2. Engine Coolant Temperature Sender Gauge
3. Combination Meter
4. Wire HarnessBE-63
BE-63
BE-58
-
All illumination lights do not light up.1. Light Control Rheostat
2. Wire HarnessBE-63
-
Brightness does not change even when rheostat is turned.1. Bulb
2. Wire Harness-
-
Only one illumination light does not light up.1. Bulb
2. Wire Harness-
-
COMBINATION METER (Warning Light):
SymptomSuspect AreaSee page
Warning lights do not light up. (Except discharge, open door and
SRS)1. GAUGE1 Fuse
2. Combination Meter
3. Wire Harness-
BE-58
-
Fuel level warning light does not light up.
1. LED
2. Combination Meter
3. Fuel Sender Gauge
4. Wire Harness-
BE-58
BE-63
-
ABS warning light does not light up.
1. LED
2. ABS ECU
3. Wire Harness-
DI-502
-

BO1JU-03
BE3367
2 - 2.5 mm
(0.024 - 0.026 in.)0.6 - 0.65 mm(0.079 - 0.098 in.)
- BODYFRONT WIPER AND WASHER
BO-35
2609 Author
: Date
:
2004 LAND CRUISER (RM1071U)
ADJUSTMENT
ADJUST WASHER NOZZLE
Using a tool like the one shown in the illustration, change the
direction of the nozzle hole to adjust the point where washer
fluid hits the windshield.

BO1JT-03
H04842
AA
M
BH
D
I
J E
S F
O NL G
P
Q
X
TK R FE U
C
S W
V
BO-34
- BODYFRONT WIPER AND WASHER
2608 Author
: Date
:
2004 LAND CRUISER (RM1071U)
INSPECTION
INSPECT WASHER NOZZLE
While operating the washer, check if the point where the washer
fluid hits the windshield is within the range indicated by the
hatched line.
A: Approx. 311 mm (12.24 in.)
B: Approx. 110 mm (4.33 in.)
C: Approx. 86 mm (3.39 in.)
D: Approx. 116 mm (4.57 in.)
E: Approx. 205 mm (8.07 in.)
F: Approx. 22 mm (0.87 in.)
G: Approx. 138 mm (5.43 in.)
H: Approx. 60 mm (2.36 in.)
I: Approx. 85 mm (3.35 in.)
J: Approx. 364 mm (14.33 in.)
K: Approx. 496 mm (19.53 in.)
L: Approx. 81 mm (3.19 in.)
M: Approx. 35 mm (1.38 in.)
N: Approx. 157 mm (6.18 in.)
O: Approx. 159 mm (6.26 in.)
P: Approx. 63 mm (2.48 in.)
Q: Approx. 169 mm (6.65 in.)
R: Approx. 331 mm (13.03 in.)
S: Approx. 465 mm (18.31 in.)
T: Approx. 468 mm (18.43 in.)
U: Approx. 45 mm (1.77 in.)
V: Approx. 104 mm (4.09 in.)
W: Approx. 119 mm (4.69 in.)
X: Approx. 44 mm (1.73 in.)

BO1JU-03
BE3367
2 - 2.5 mm
(0.024 - 0.026 in.)0.6 - 0.65 mm(0.079 - 0.098 in.)
- BODYFRONT WIPER AND WASHER
BO-35
2609 Author
: Date
:
2004 LAND CRUISER (RM1071U)
ADJUSTMENT
ADJUST WASHER NOZZLE
Using a tool like the one shown in the illustration, change the
direction of the nozzle hole to adjust the point where washer
fluid hits the windshield.

BO1JT-03
H04842
AA
M
BH
D
I
J E
S F
O NL G
P
Q
X
TK R FE U
C
S W
V
BO-34
- BODYFRONT WIPER AND WASHER
2608 Author
: Date
:
2004 LAND CRUISER (RM1071U)
INSPECTION
INSPECT WASHER NOZZLE
While operating the washer, check if the point where the washer
fluid hits the windshield is within the range indicated by the
hatched line.
A: Approx. 311 mm (12.24 in.)
B: Approx. 110 mm (4.33 in.)
C: Approx. 86 mm (3.39 in.)
D: Approx. 116 mm (4.57 in.)
E: Approx. 205 mm (8.07 in.)
F: Approx. 22 mm (0.87 in.)
G: Approx. 138 mm (5.43 in.)
H: Approx. 60 mm (2.36 in.)
I: Approx. 85 mm (3.35 in.)
J: Approx. 364 mm (14.33 in.)
K: Approx. 496 mm (19.53 in.)
L: Approx. 81 mm (3.19 in.)
M: Approx. 35 mm (1.38 in.)
N: Approx. 157 mm (6.18 in.)
O: Approx. 159 mm (6.26 in.)
P: Approx. 63 mm (2.48 in.)
Q: Approx. 169 mm (6.65 in.)
R: Approx. 331 mm (13.03 in.)
S: Approx. 465 mm (18.31 in.)
T: Approx. 468 mm (18.43 in.)
U: Approx. 45 mm (1.77 in.)
V: Approx. 104 mm (4.09 in.)
W: Approx. 119 mm (4.69 in.)
X: Approx. 44 mm (1.73 in.)

BO1JZ-03
BE3367
2 - 2.5 mm
(0.028 - 0.030 in.)0.7 - 0.75 mm(0.079 - 0.098 in.)
- BODYREAR WIPER AND WASHER
BO-41
2615 Author
: Date
:
2004 LAND CRUISER (RM1071U)
ADJUSTMENT
ADJUST WASHER NOZZLE
Using a tool like the one shown in the illustration, change the
direction of the nozzle hole to adjust the point where washer
fluid hits the back door glass.

BO1JY-03
H18919
BA C
E
F D
G
BO-40
- BODYREAR WIPER AND WASHER
2614 Author
: Date
:
2004 LAND CRUISER (RM1071U)
INSPECTION
INSPECT WASHER NOZZLE
While operating the washer, check if the point where the washer
fluid hits the back door glass is within the range indicated in the
illustration.
A: Approx. 40 mm (1.57 in.)
B: Approx. 180 mm (7.09 in.)
C: Approx. 40 mm (1.57 in.)
D: Approx. 30 mm (1.18 in.)
E: Approx. 120 mm (4.72 in.)
F: Approx. 90 mm (3.54 in.)
G: Approx. 15 mm (0.59 in.)

MA02P-02
- MAINTENANCEOUTSIDE VEHICLE
MA-1
49 Author
: Date
:
2004 LAND CRUISER (RM1071U)
OUTSIDE VEHICLE
GENERAL MAINTENANCE
These are some maintenance and inspection items which are considered to be the owner's responsibility.
They can be done by the owner or they can have them done at a service shop. These items include those
which should be checked on a daily basis, those which, in most cases, do not require (special) tools and
those which are considered to be reasonable for the owner to do. Items and procedures for general mainte-
nance are as follows.
1. GENERAL NOTES

Maintenance items may very from country and country. Check the owner's manual supplement in
which the maintenance schedule is shown.

Every service items in the periodic maintenance schedule must be performed.

Periodic maintenance service must be performed according to whichever interval in the periodic main-
tenance schedule occurs first, the odometer reading (miles) or the time interval (months).

Maintenance service after the last period should be performed at the same time interval as before un-
less otherwise noted.

Failure to do even one item an cause the engine to run poorly and increase exhaust emissions.
2. TIRES
(a) Check the pressure with a gauge. If necessary, adjust.
(b) Check for cuts, damage or excessive wear.
3. WHEEL NUTS
When checking the tires, check the nuts for looseness or for missing nuts. If necessary, tighten them.
4. TIRE ROTATION
Check the owner's manual supplement in which the maintenance schedule is shown.
5. WINDSHIELD WIPER BLADES
Check for wear or cracks whenever they do not wipe clean. If necessary, replace.
6. FLUID LEAKS
(a) Check underneath for leaking fuel, oil, water or other fluid.
(b) If you smell gasoline fumes or notice any leak, have the cause found and corrected.
7. DOORS AND ENGINE HOOD
(a) Check that all doors and the tailgate operate smoothly, and that all larches lock securely.
(b) Check that the engine hood secondary latch secures the hood from opening when the primary latch
is released.