ADJUSTABLE SHOCK ABSORBER
Trouble Diagnoses (Cont'd)
'henomenoi on switch
One lamp o
2 lamps on
rnd off
[continued)
Possible cause ~
Wire
broken or
shorted in motor
harness of shock
absorber
b Wire broken or
shorted in position
switch harness of
shock absorber
1 Motor completely
locked
1 Motor overloaded
(Temporary overload
Controller out of
order
Checking method
Checking procedure
(1 I Changing the connection
combinations
of the 3
dummy actuators, check
4 shock absorbers one by
one using the operation
described
in (2) below
(2) Turn switch to F, N, S
and check lamp for
proper lighting condition
Same as above
Same as above
(1) Turn key off to stop
the lamp from going
on
and off, then turn key
on again and check lamp
for proper lighting
condition
12) Check power voltage
:3)-1 Changing the connectior
combinations of the
4 actuators, check each
of the
4 shock absorbers
in one place described
in 131-2 below
13j-2 Turn switch to F, N, S,
and check lamp for
proper lighting condi-
tion.
Replace with normal control-
er, and operate switch, check
amp for proper lighting con-
jition
Result
Selected On
2others On
and
off
(When connected
to shock absorber
out of order)
Same as above
Same as above
Selected . On
2others
Off
Below 9 V
Selected On
2others On
and off
(when connected
to overloaded
shock absorber1
jelected On
Zothers
. On
3nd off
I Returned to
iormal state)
Corrective action
Replace shock
absorber
Same as above
Same as above
Normal
If it is frequent,
take action as
described in (3) below
Repair power system
(Charge battery)
Replace shock
absorber
Replace controller
FA-20
