1974 Citroen CX door lock

Downloaded from www.Manualslib.com manuals search engine dent,
nark
B9
90
DESCRIPTION OF COMPONENTS
Description and Location
instrument panel
Speed0 and tacho lighting
79 ..............
. Tachometer 25-26
........... ............
I Battery meter and lighting ............ 81-107
Fuel gauge ...................... 83
- Lighting for odometers
...................... 108
- Clock and lighting
.................... 70-109
warning lamps for
- Heated rear window ............................... 97
- Dipped beam ... ..... ............................ 101
- Front brake pad wear ...................... 80
- Low fuel ....
............................ 82
-. Engine oil temperature ..... .................
71
- Coolant temperature ...........................
77
- Engine oil pressure ....... .... ............ ...
73
- Emergency STOP (and test button )74-76-78
- Hydraulic fluid’pressure ................... 75
- Hazard warning lamps ....................... 63
- Sidelamps 106
....................... ..... ..............
- Direction indicators ....... ............... 69
- Main beam
99 .....
.............................. ...
- Handbrake
98 ........ ............ ., .............. ...
- Rear foglamps .......... ................. ..lO 4
L.H. switch unit
- Horns 54-55
..... ....................................
- Direction indicators and hazard warning
lamps ...................................... 63 to 67
- Windscreen wiper and washers ...... 56 to 59
- Front foglamps ........ ....... ................. 111
DESCRIPTIOI dent
nark
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106 Description and Location
Ignition switch lighting .................... : 110
Flasher unit ....................... 68-69
Speaker ( in L..H. front door )
......... 84
Rear R.H. door lighting switch
90 ..........
Fuel pump 7
.............................
Rear R H. interior lamp ....................
90
Fuel qauge rheostat
.................... 82-83
Boot lamp
....................................... 86
Heated rear window
......................... 96
Rear L.H. interior lamp
.................. 89
Rear L.H. door lighting switch
............ 89
Rear R.H. lamp cluster
- Foglamp
..................................... 105
- Reversing lamp .............................
95
- Direction indicator ...................
65
- Stoplamp ........... ......................... 51
- Sidelamp ...........................
105
R .H. number plate lamp .......... ... ........
114
L H. number plate lamp ..... ........... ...
113 Boot lamp switch .................................
86
Rear L.H. lamp cluster
- Foglamp
....................................... 104
- Reversing lamp ................................
94
- Direction indicator ............................. 64
- Stoplamp
........................................ 52
- Sidelamp
... ..... ................................. 112
IING HARNESSES
I Id. Mark Description
I Id. Mark Description
AV
Front wiring harness FV Flying lead
No mark on circuit diaqram
IC Injection. on body- shell
R Rear IM Injection, on engine
C Boot
M Engine
CL Air-conditioning (optional ) PC Boot lid
co Compressed air horn
TB Instrument panel
D (( Diagnostic 1) UF Front brake pad wear ( 2 harnesses )

Downloaded from www.Manualslib.com manuals search engine OPERATION No MA. 841-O : Adjusting fh~ doors Op. MA. 841-O 1 I. ADJUSTING A FRONT DOOR
1. Longitudinal adiustment :
Check
the clearance of the front door with the
front wing and the rear door : J=6+_3mm
If necessary. add or withdraw the adjustment shims
( thickness 1 or 2 mm ) at <( a 1) and << b to_ a) Fitting shims at SC a u :
Remove screw (2) and loosen the 2 screws ( 1).
Slide the shims between hody and hinge.
Fit screw (2) and tighten the three fixing
nuts of upper hinge.
b) Fitting shims at <, b n :
Remove the two fixing screws (4) for distance
strop (3) and tilt it.
Loosen the two screws (5 ).
Slide the shims between body &hinge and
retighten fixing screws (5 ). 2. Transversal and height adjustments :
Loosen hinge fixing screws.
Move the door vertically in order to obtain a
clearance of : Jl = 7 +‘2mm
between the upper port of the window frame and
the roof edging.
Check ‘the continuity of the a light line 1) and
the difference in alignment between door and
front wing. Inset of front door in relation to
front wing = maximum of 2 mm.
Tighten the hinge fixing SCWNS and fix door
check (3) using screws (“4). 3. Adjustment of door striking plate engagement :
Loosen. the two door striking plate fixing screws
and adjust the plate so that correct locking and
sufficient compression of the door rubber sealing
strips is obtained.
If necessary, fit shims at (cc )P.
The rear edge of the front door must not stand
proud by more than 2 mm with respect to the front
edge of the rear door.
Tighten the screws (6 ).

Downloaded from www.Manualslib.com manuals search engine 2 OPERATION NO MA. 841-O : Adjmfing /he o’r,ors
II. ADJUSTING A REAR DOOR
1. Longitudinal adjustment :
Check the clearonce of the rear door with the
rear wing and with the front door :
J =6+~3mm
If necessary, fit Suitable shims ( of thickness 1 or
2 mm ) at points (( a N and (( b )).
a) Fitting shims at point II a * :
Remove screw ( 1) ond loosen screws (2).
Slide in at point I< a D under hinge the shim or
shims required.
Fix scr&v (2 ).and tighten the three hinge
fixing screws.
b)
Fitting shims at point e b u :
Remove distance strop fixing screws and pivot
it, around its axis.
Loosen the two hinge fixing screws (4).
Slide shims under hinge at point <, b >j.
Re-tighten fixing screws (4 1.
2. Transversal and height adjustments :
Check clearance between upper edge of window
frmne and
edqe of roof :
Jl =7+~2mm
Check also continuity of the G light line x
and the recess
of the rear door in relation ta
the front door : 2 mm max.
Loosen upper and lower hinge fixing screws.
Adjust door to obtain positioning (IS above.
Tighten fixing screws of these hinges.
Secure distance strap by its two screws (3)
3. Adjustment of striking plate engagement :
Loosen striking plate fixing screws (3) and adjust so as
to obtain correct locking of door and sufficient
compression of the rubber sealing strips.
If necessary, fit adjustment spacers at point o c u.
Check recess
of rear wing in relation ta rear
dwr : 2 mm max.
4: Position window-winder handle to obtain an angle.
of W = approximately 30’ when the window is
closed.